What did you do in your shed / man cave today?

[Raym]

Very nice Pottsy

[Fizzie]

I reckon she'd be thrilled, especially with the giraffe!

You couldn't find any unicorns

[Pottsy]

I reckon she'd be thrilled, especially with the giraffe!

You couldn't find any unicorns

There is a unicorn, but I just tell the grandkids it's a horse with a shell stuck on its head.

[Hairs]

Replaced the 3 sets of blades on the Cox Cruz, only to do about 3/4 of an hours mowing and have the centre set of cutters, the bearing collapse and destroy the carrier and shaft, key and the pulley.
2 hours later, I got it all out & apart.
Mondays job will be to find replacement parts, If I can't get genuine parts.
Looks like I'm off to buy a mate a few beers, he's rocked up with his little Fergie and 4 foot slasher.

[6knights]

Well done Pottsy, my daughter dose paint by number stuff ,l can see the whole canvas as for the numbers..... forget it 🙄

[Pottsy]

Finished this one today, I'm going to have a crack at making a frame. This one's going to my grandson.

[DrewXT]

Fit a pole carrier to the neighbours Jayco Expanda ... Apparently doing up 6 bolts is hard?

Next weekend I have to put a 12v pump into it for him

Sent from my Pixel 3 XL using Tapatalk

[NZMarkb]

Fit a pole carrier to the neighbours Jayco Expanda ... Apparently doing up 6 bolts is hard?

Next weekend I have to put a 12v pump into it for him

Sent from my Pixel 3 XL using Tapatalk

Arrr some fake just aren't very practical
But I'm sure he has other super powers 😉

[GeoffA]

Arrr some fake just aren't very practical
But I'm sure he has other super powers 😉

...yeah, like getting others to do stuff for him...

[NZMarkb]

...yeah, like getting others to do stuff for him...

😂😂😂

[Fizzie]

Finished this one today,

Again, nice!

I'm going to have a crack at making a frame.

Why do I have this feeling that won't be a huge challenge

[Hairs]

Arrr some fake just aren't very practical
But I'm sure he has other super powers

Ahahaha, that's what some pay me for.
Because hubby doesn't know a left handed screwdriver from a right handed one

[Hairs]

Mondays job will be to find these as new. And the pulley, key way is flogged out.
Hmmm,

[bmwfreak]

Modified the draws I built for the troopy, after re-installing the rear seat.

[Hairs]

All parts ordered,

[DrewXT]

Started back at work, so spent more time than usual in the shed

Sent from my Pixel 3 XL using Tapatalk

[D4D]

Started back at work, so spent more time than usual in the shed

I love working from home

[DrewXT]

I love working from home

It's the work bit I'm not enjoying so much right now...

Sent from my Pixel 3 XL using Tapatalk

[Bird]

It's the work bit I'm not enjoying so much right now...

can be like that after a great road trip

[DrewXT]

can be like that after a great road trip

Haven't even had the road trip...

Sent from my Pixel 3 XL using Tapatalk

[Bird]

Haven't even had the road trip...

we share the same issue...

[Jason B]

Cleaning and spending......🤕

[Spada]

looks trick 

[lloydus67]

Cleaning and spending......

Nice escort Jason
Is that the 2.0L twin cam cosworth motor in front of it?


Sent from me

[Jason B]

Nice escort Jason
Is that the 2.0L twin cam cosworth motor in front of it?


Sent from me

Yes mate, that's the plan. However I am building it as a 2.3L on a stroked crank, naturally aspirated on throttle bodies. I want that period correct sound and look rather than a turbo version. I have a few heads so may build a turbo version down the track if I get tired of all the noise, revs and drama of the N/A version 😂.

I managed to score a genuine head from the Andy Rouse EngIneer GRPA campaign. Power won't be insane with our target around 240hp and 180/200 ft/lb of torque. Engine will be built for torque and I'm building it primarily as a road car. There is a thread on Escorts in here mate under the miscellaneous tab if you have a look quite a few swaggers have some cool projects coming along.