What did you do in your shed / man cave today?

[plusnq]

 

[NZMarkb]

Finally got around to fitting the Brembo rotors & pads to the 200 that have been sitting there for 2 months

[DrewXT]

Acid washed and colour sealed 72 sqm of concrete

Sent from my Pixel 3 XL using Tapatalk

[Bird]

Very tidy! looks great.

[Fizzie]

Acid washed and colour sealed 72 sqm of concrete

Nice!

What's the area at the back with all the conduit going to be

[D4D]

Acid washed and colour sealed 72 sqm of concrete

Nice dog house!

[Pottsy]

Looks fantastic, but you know it won't be big enough.

[DrewXT]

Nice!

What's the area at the back with all the conduit going to be

The conduit and piping is plumbing for the pool in going to have to maintain at some stage, we've also got about 7000 litres of water tanks to go on the slab as well.

Sent from my Pixel 3 XL using Tapatalk

[NZMarkb]

Looks fantastic, but you know it won't be big enough.

They never are😂😂

[DrewXT]

Looks fantastic, but you know it won't be big enough.

Looks so much smaller with one trailer and my second set of wheels in it already...

Currently looking for affordable C/D ply to line it with, once the builder sorts out a leak in one of the corners where they cut the sheets too short by about a half inch

Sent from my Pixel 3 XL using Tapatalk

[Bird]

Looks so much smaller with one trailer and my second set of wheels in it already...

Currently looking for affordable C/D ply to line it with, once the builder sorts out a leak in one of the corners where they cut the sheets too short by about a half inch

Sent from my Pixel 3 XL using Tapatalk

when I planned to line my shed, there was someone on here while back that had packing sheets of ply for beer... he was down geelong way..

[DrewXT]

when I planned to line my shed, there was someone on here while back that had packing sheets of ply for beer... he was down geelong way..

I want 12 or 15mm, so I can hang Shit anywhere we want to... We'll get there when the care factor increases, I need to make her a side gate first

Sent from my Pixel 3 XL using Tapatalk

[DrewXT]

Nice dog house!

Sent from my Pixel 3 XL using Tapatalk

[DannyG]

I built a smoker out of beer barrels. I want to leave it outside permanently so I made it all stainless. Well it has wood and I machined some alloy for the handles but it should stand the test of time 
Just a side note, the blackwood on the handles is from a coffee table I built in high school in 1983 that's been floating around the family all this time!!

[DannyG]

I wanted an outdoor box to put some cooking stuff etc in so after looking at the usual commercially available items and being a cheapskate I slapped one together using materials that were laying around the boneyard  Cost $0......stain I put on it to make it look more timberish $18!!

[bmwfreak]

Great work DannyG

[Pottsy]

You've been a busy boy, looks great, well done.

[plusnq]

Fitted new rear speakers to the 130. Mounting blocks and speaker frames were shaped by hand to fit. Very happy with the result.

[Bird]

I built a smoker out of beer barrels. I want to leave it outside permanently so I made it all stainless. Well it has wood and I machined some alloy for the handles but it should stand the test of time 
Just a side note, the blackwood on the handles is from a coffee table I built in high school in 1983 that's been floating around the family all this time!!

10/10 Mr.... love it

[Fizzie]

an outdoor box

Looks great (& so does the smoker!) & certainly isn't going to blow away in a sudden gust of wind!

[bmwfreak]

Started on a dog door out through one of the back french doors. I was originally going to purchase a ready made one from a retailer, but the sizes don't suit the door. I removed a pane of glass and secured a 'mud flap' in its place. I will need to do a bit more from the security point of view, but functionally this works a treat. The older of the two puppies can manage the door quite well, while the younger hasn't the height, yet, to knock the flap open with her forehead rather than being put off by trying to use her sensitive nose for the job.

Quad removed on outside of door with glass still in place. I was hoping this would be simple, but the glass had been 'secured' and wouldn't budge. Finished up breaking the pane trying to remove it, then got the multi tool out and cut away the moulding and glass.


Just need to finish off with some stain and a security flap on the inside.


In action with older dog




Sent from my iPad using Tapatalk

[bmwfreak]

Just a coat of stain to go now. 

[GeoffA]

Nice work 

Hope it's lockable....

I put a dog flap in the laundry door at out first house.
Came home one day to find my brother sitting in the lounge room.

We were much smaller then.....

[Bad Scott]

I put a dog flap in the laundry door at out first house.
Came home one day to find my brother sitting in the lounge room.

Challenge accepted

Sent from .............. Somewhere in Australia

[westvic]

Just a coat of stain to go now. 

is it just me or do these photos make it look like a guillotine