What did you do in your shed / man cave today?

[GGV8Cruza]

The market will be awash......

Depends if you are game enough

GG

[GeoffA]

Depends if you are game enough

GG

No hurry here GG........

[Shelbyright]

Completed the installation of my GPS tracker, which now also engages the electric brakes when I send it a code.

installation took me a while as everything is completly integrated into the electrical system and even the GPS and GPRS àntennaes are very nicely concealed

Hope I never have to use it, because it might make a mess.

[GGV8Cruza]

Changed the handing on the Warn 9.5, ready to be installed on Tuesday in the new bar. Of course nothing is simple amd one screw started to cross thread. All fixed now and not one sign of water in the gear box which is great, Mal knows his stuff

GG

[smokescreen]

I dusted the cobb webs off the quad bike in preparation for tomorrows ride it's about time the poor thing only comes out 4 or 5 times a year.

[Foo]

Made some alcohic for the coming weeks. 

Foo

[GeoffA]

Fitted a new intercooler.
Works well, but the real test run starts on Friday when we head north for the Cape trip......

[speewa158]

GeoffA   Heading North to the cape ,,,,,,to explore ,,,, to meet new people ,,, & enjoy your self           Lucky Bastard   

[speewa158]

After 45MM of rain since dark last night to moisten the dust/mud today wasn't an outside kind of day  .
Spent the day making articulated tractors , fixed the trailer lights in the CT , started to empty the engal again , another productive day 

[Brett B]

Fitted a new intercooler.
Works well, but the real test run starts on Friday when we head north for the Cape trip......

Top job there Geoff 

[Cruiser 105Tvan]

GeoffA   Heading North to the cape ,,,,,,to explore ,,,, to meet new people ,,, & enjoy your self           Lucky Bastard 

x2

[GGV8Cruza]

Fitted a new intercooler.
Works well, but the real test run starts on Friday when we head north for the Cape trip......

Looks even more impressive in the flesh, I am sure it will keep it nice and cool under the bonnet up North Geoff, have a great trip

GG

[JCAT]

Changed the rear diff oil and sprayed some new stone guard under the rear wheel arches of the Prado.

Finished carpeting the draw bar of the camper in preparation for our trip.

[fridayman]

I discovered my t-handle socket and hex set in a box, so knocked up a rack for them.
Then made a new more permanent shroud for the intercooler fan.
And finally got round to fixing my saggy man cave sofa bed.

[D4D]

...and sprayed some new stone guard under the rear wheel arches of the Prado.

[Pog]

Fitted a pair of Lightforce 50w HID Genesis spot lights to the Prado, replacing some sh!tty cheap HID lights I had fitted last week.

I also wired up an Anderson Plug from the the tow bar to the 120ah AGM battery in the front box on the camper. Something I have been meaning to do for a year.

After all that, I pulled the camper out and re-made the bed with fresh sheets and a couple of extra blankets for the SA GTG next weekend.

[Bird]

Fitted a new intercooler.
Works well, but the real test run starts on Friday when we head north for the Cape trip......

looks fantastic... really factory fit.. so whats the go ith the old gear

[GeoffA]

looks fantastic... really factory fit.. so whats the go ith the old gear

Thanks. Very happy with the result. A lot of I/C installations I've seen look like they've been done with an axe......didn't want that.

All the old stuff is sitting in the shed. Not in a hurry to do anything with it.
Buy GG's gear, it's good .......(and mine will be more expensive anyway )

[JCAT]

..... sprayed some new stone guard under the rear wheel arches of the Prado.

Here is an example of the old stuff that was flaking/peeling off from the wheel arch. I reckon the sand on Fraser has had a bit to do with it.



This is the new stuff. The finish is pretty even but I don't think its anywhere near as thick as the old stuff. It was in a spray can and I applied 3 coats to each side at 20 minute intervals.







May have to apply some more coats before we go. The edges of the old stuff are very thick but on the tops of the wheel arch is was only really envelope thick. Not sure what the car manufacturers actually use but the stuff I used I was told to get by a panel shop when I took the Prado in for them to have a look at.

[Spada]

Took me 2 weekends, but I made me some draws for the cruiser.

[Rumpig]

headed down to mates shed this arvo to change out the viscous fan hub, whack in a different fan blade and replace the broken radiator shroud on my Cruiser. I would have done it home under the carport, except the mozzies would have eaten me alive 

[Dkirk]

New hitch for the dove now I can do my measurements and order a Stonestomper

[jmorgan1981]

Got around to running 240v in the camper.

Plus unpacked the last couple of boxes. One of them a box of beer.

[RallyDog]

Put the Quads on the trailer to take the boys out for the day.

[markg66]

Helped (directed) the young'un to put a new thermostat in his Rav4, flushed radiator and block, new coolant, demineralised water............now the water pump is pissing water out the seal weep hole.............   
Have ordered a timing belt/water pump and gasket set now.......dam east west engines, take me back to my 351 cleveland.