What did you do in your shed / man cave today?

[lindamc]

Just spent a lovely afternoon putting rubber around the bars of the trailer stoneguard, attached with cable ties, also rubber to the two front corners of the trailer and ends of pole carrier, where the stones get past the guard. These were glued.
Im hoping this will be a bit of protection for both the trailer and the back of the car..ie may stop wayward stones hitting the guard and bouncing onto back door of car.
Anyway I had fun.

Sent from my GT-I9100T using Tapatalk 2

[Brumbypt]

wired up my offroad trailer (2) , tail lights, clearance lights, and electric brakes.

took all day, thats cos I did a few silly things.. like forgetting number plate lights.


also ran the cable for the handbrake and didn't find any guides to run the cable in. Guess what I have to do tomorrow. first scratch off the nice paint, then weld the guides on, then scrape off the crap and repaint.. wish I remembered to weld them on when the trailer was raw and upside down at the start. ohh well...





Peter,
iPad with IOS 7.0.3 using Tapatalk HD

[nick 08]

Finished sanding and trimming the hardwood and now assembled in the back yard. Just got to clean the saw dust out of the shed.

Sent from my C6603 using Tapatalk

[Bill]

Great job nick 08.
Kids must be loving playing on it.
Bill

[D4D]

Great job Nick, I'm about to start oiling my son's cubbie, can't decide whether to use a brush or spray it...

[Brett B]

Going to wire up my torque converter lock up switch 

[Mace]

Bottled a brew of ginger beer, mid strength of course. Now the two week wait for 

Lucky I have a collection of other  to sample to fill in time.

[Steffo1]

Had to move a few things around for our new, to us, baby.

[D4D]

Going to wire up my torque converter lock up switch 

You can test it on my drive way

[D4D]

Oiled 2 sides of the cubby then got a dose of CBF

[Black Diamond]

You can test it on my drive way

last time I went too your joint I had to drop the tyre pressures and hit low range to get up. Steeper than billy goats

[Brett B]

All wired up and it works
Plenty of steep tracks and driveways out here 

[Black Diamond]

Finally wired up the Narva 225's that have been sitting on the bullbar for 12 months
Now waiting for the sun to go down for a spin

[Black Diamond]

All wired up and it works
Plenty of steep tracks and driveways out here 

Nice work Bretto, what's it like down low?

[Brett B]

Nice work Bretto, what's it like down low?

Havent tried it in low range yet
But in Hi range when you hit the switch it drops about 200 rpm and pulls really well and noticed a big drop in trans temp
For it to work in first and reverse l need to put the Nomad valve body in

[Brett B]

You can test it on my drive way

Be there soon

[Barry G]

Tidied up the wiring to the crank battery, as part of working towards fitting second battery.
Mounted a Jaycar 'bus bar' on top of the fuse box lid. All positive wires fitted off to it, then a single wire to battery - other than the 6B&S wire to the dual battery circuit breaker.
Also cleaned out the trailer.
Yesterday I  did a bit of grinding to the tips of the pins that hold the rear legs of the trailer, so that I can lock them down with padlocks, in place of 'R' clips. Just another minor safety precaution.

[berlitza]

tripped over the plane that was I was building and finally making some progress with and busted the    f%&($% frame for the right aileron  mounting point thing, cars are more my thing anyhows, anyone wanna buy a couple of enya 4 stroke model engines 

[carinya]

Redesigned the layout of the shed.  Should have done it years back, considering all the rubbish I got to throw out.  Do the other half tomorrow + beer.

[Black Diamond]

Redesigned the layout of the shed.  Should have done it years back, considering all the rubbish I got to throw out.  Do the other half tomorrow + beer.

Did that this morning too, then cleaned the CT and hit the canvas with the Gerni. Then hit the beach 

  BD

[TheWall]

Wax on, wax off...wax on, wax off...

[D4D]

Both cars washed and vacuumed, started at 7am before it got too hot/sunny. Wife drove the Prado during the week and on the only rainy day for months she decides to park under a gum tree and get the Prado covered in sap

[GeoffA]

Both cars washed and vacuumed, started at 7am before it got too hot/sunny. Wife drove the Prado during the week and on the only rainy day for months she decides to park under a gum tree and get the Prado covered in sap

Shoe sale??...

[Swogjb]

Finally got around to splitting the batteries in the cruiser.
I've been thinking about it for over 12 months.
Used an Intervolt VSR and a couple of Optima D31A yellow top batteries.

Might head over to Canuda NP this arvo, take the lids for a swim and knock the top of a few frothy ones.  .

[Brumbypt]

sharpened the chainsaw and then went and used it, then sharpened it again, then used it some more...

I am now sharpening it free hand, so just a file, no guides jigs, electricity or anything else except a vice and file..

coolio..


Peter,
iPad with IOS 7.0.4 using Tapatalk HD