News:

Welcome to MySwag.org - Australia's #1 Off-road Camper Trailer Forum.

Main Menu

What did you do in your shed? 2025

Started by Hairs, April 03, 2025, 07:23:42 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Hairs

Most caravan parks, that do allow a fire, require it to be 300mm above ground.
So I made a 600x600 tray for the pit to sit on.
Our son is always having a crack at me,  regarding the old steel and bits & pieces I have laying around in the shed or under the house.
An hours work, done.
It's an old Guinea pigs tray from the cage, 4 lenghts(320mm) of 12 threaded rod, some flat washers and 8x shocky washers,  it can be dissembled and packed flat.
Happy Wife.


You don't use magic to disappear, ya use a 4x4 & Swag.

You don't use magic to disappear, all you need is a 4wd & a Swag ;)

Fizzie

Quote from: Hairs on July 23, 2026, 10:42:58 AMrequire it to be 300mm above ground

But isn't the pit by itself good enough for the 300mm ???

We've never had a Park complain when we've used them just by itself!
Winner PotM comp Jan 2021, Mar 2026!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'

Fizzie

What do you call these "pins" ???

Latch pins / lock pins / something else ??? 

& where do you get them? The BGS has nothing!  ::)
Winner PotM comp Jan 2021, Mar 2026!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'

Hairs

Quote from: Fizzie on July 24, 2026, 07:35:14 AMBut isn't the pit by itself good enough for the 300mm ???

We've never had a Park complain when we've used them just by itself!
Sorry for the late reply Fizzie.
Brooms Head Caravan Park, a lot of things have changed there in the couple of years.
I too, would of thought that the folder fire pit was sufficient, but no, it had to be 300mm above ground.
All ash/sunburnt material had to be taken away, couldn't put the ash in a garden bed, yet when we arrived we had on our site, small chunks of carbon, and unburnt bark.pieces.
Hmm, yet others, caravans had their sink water/suliage  hoses emptying onto vacant sites.
We didn't argue, we enjoyed 2 nights spent around our fires, telling BS, and laughing.




You don't use magic to disappear, ya use a 4x4 & Swag.

You don't use magic to disappear, all you need is a 4wd & a Swag ;)

Rowlie

Quote from: Fizzie on August 13, 2026, 01:10:30 PMWhat do you call these "pins" ???

Latch pins / lock pins / something else ??? 

& where do you get them? The BGS has nothing!  ::)


Hi Fizzie,
I googled SS flat head pins and this came up on Allie Express. "5/10pcs M3 M4 M5 M6 M8 M10 Clevis Pins With Head 304 Stainless Steel Shaft Flat Head With Hole Pin Bolt Pin Cylindrical Pins"
Hope that helps.

Rowlie

Pottsy

Try an industrial fastener supply business Fizzie, I reckon they would be your best bet.
if God had meant me to walk he wouldn't have invented 4wds! Mitsubishi Challenger Pc 2014 (Blondie)
Challange Meredien Offroad Walk Thru

Fizzie

Quote from: Hairs on August 13, 2026, 05:01:27 PMBrooms Head Caravan Park, a lot of things have changed there in the couple of years.
I too, would of thought that the folder fire pit was sufficient, but no, it had to be 300mm above ground.

Wow!

I suppose, though, that we should be grateful that they even allow fires! A lot of Parks don't allow them at all.
Winner PotM comp Jan 2021, Mar 2026!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'

Fizzie

Thanks, everybody, for suggestions re Clevis Pins - closest thing I've seen so far!

Thinking that mine may be a specially made up thing? CP are all apparently solid & reasonably short, while the one I showed you is hollow, 190mm long x 13mm OD!
Winner PotM comp Jan 2021, Mar 2026!

Isuzu: 2017 MU-X LST
Coromal: 2023 Soul Seeker 18'

Troopy_03

Quote from: Fizzie on Yesterday at 07:41:44 AMThanks, everybody, for suggestions re Clevis Pins - closest thing I've seen so far!

Thinking that mine may be a specially made up thing? CP are all apparently solid & reasonably short, while the one I showed you is hollow, 190mm long x 13mm OD!

If you can't find one for sale, you may be able to get someone to weld a washer to the top of a piece of tube, to make one.

Depending on the critical dimensions, and where it has to fit, you may also be able to just get a piece of tubing and instead of welding the flat head, drill a hole for a split pin to retain a washer slipped over the tube.

A pic of where it is installed maybe helpful.
4.2L TD Toyota Troopy, (Clarke's Country Camper Trailer, softfloor.) sold it and bought a Avan Ray small poptop caravan.