Solid wood putty

[GGV8Cruza]

Whats the size of the ply Bird. Have 18mm structural ply available to me at the moment, I am sure I can find a piece to fit for the correct price...... freeeeeeee

GG

[Bird]

Whats the size of the ply Bird. Have 18mm structural ply available to me at the moment, I am sure I can find a piece to fit for the correct price...... freeeeeeee

I've got some ply I could use at home (not sure of thickness, but probably 18mm) - so thanks for the offer, plus 18m ply would weigh a ton!

might walk up to Bunnings and see what a new piece is werth.

[Rumpig]

I've got some ply I could use at home (not sure of thickness, but probably 18mm) - so thanks for the offer, plus 18m ply would weigh a ton!

might walk up to Bunnings and see what a new piece is werth.

what it's worth and what they charge are 2 different things...lol

[Cruiser 105Tvan]

GGV8's form ply would be a lot heavier than the normal stuff.

He hasn't said, but I reckon that's what he's holding for you.
The dark skinned stuff, used for concrete boxing.
Benefit is the waterproofing for when you do those creek crossings.
But you might need a GVM upgrade. 

[DrewXT]

The form ply will do a better job... Stronger glue layers, plus you can slide the drawers in and out easier as it's got a bit of slip to it

Sent from my Nexus 6P using Tapatalk

[rags]

Won't a new bit of ply be cheaper and easier than buying new fixings and or special epoxy glue?

But where's the fun in that.

[Bird]

what it's worth and what they charge are 2 different things...lol

well I need a full sheet (1290x800 is what I need) and $45 for the Shittiest lookin ply they had.

[paul.o]

I'd reckon this would be the easiest and simplest, and possibly strongest.

Alternatively drop into a plumbing supplier and get some hanger plates like the below pic. Drill out the T nut hole big enough for the nut diameter and fix the plate to the underside of the ply.



Sent from my SM-G900I using Tapatalk

[GGV8Cruza]

well I need a full sheet (1290x800 is what I need) and $45 for the Shittiest lookin ply they had.

I can get you a nice black sheet that size, strong as and I will need to know in the next hour before I go out to lunch. Best part Bird, its free and the strongest ply around, brand new and matt black. I know the GVM of the Pootrol will handle it   

GG

[Cruiser 105Tvan]

Your a top fella Garrick, I don't believe all those bad things Bird says about you.

[Bird]

` I can get you a nice black sheet that size, strong as and I will need to know in the next hour before I go out to lunch. Best part Bird, its free and the strongest ply around, brand new and matt black. I know the GVM of the Pootrol will handle it   

yea may as well.. you can drop off too ?

[GGV8Cruza]

yea may as well.. you can drop off too ?

Loaded on the rack. If you bring up the Patrol I may even fit it for you 

GG

[Bird]

Loaded on the rack. If you bring up the Patrol I may even fit it for you 

it still needs trimming and shaping
give ya a call when I get home.

[GGV8Cruza]

How did the fitting go  Bird on the new board

GG

Sent from my SM-G955F using Tapatalk

[xcvator]

He's probably still thinking about it 

[DrewXT]

He's probably still thinking about it 

Someone had to say it...

Sent from my Nexus 6P using Tapatalk