Engel fridge tilt slide issue.

[dales133]

I just got an Engel mt45 dual zone fridge and a tilt fridge slide ,
Everytime i slide the fridge out and slide it back the power lead gets in the way and im concerned about damaging it.
Anyone come up with a solution for this?

Sent from my SM-N910G using Tapatalk

[Gazza00]

I used one of these

http://au.rs-online.com/web/p/cable-trunkings/4546207/

[dales133]

Says its discontinued Gazza

Sent from my SM-N910G using Tapatalk

[edz]

Here ya go Dales http://www.ebay.com.au/itm/10-x-10mm-R28-Black-Flexible-Cable-Chain-Drag-Carrier-Cable-Track-39-Inch-/252217182583?hash=item3ab950c977:g:L~YAAOSwOyJX5JxE

[Gazza00]

Just Google  Cable Track   I'm sure you will find something

Its along time ago that I bought it  and now have a different set up where I deleted the PITA slide system

[dales133]

Cheers edz.
How do you get the cable ends through these or does it clip over the cable?

Sent from my SM-N910G using Tapatalk

[LC]

If you had the fridge on the other side, the cable could be passed up and over the grab handle for the 3rd row passengers.

[dales133]

Just Google  Cable Track   I'm sure you will find something

Its along time ago that I bought it  and now have a different set up where I deleted the PITA slide system

How did you get around a slide mate?

Sent from my SM-N910G using Tapatalk

[D4D]

Loop the cable through the grab handle, simples...

[dales133]

If you had the fridge on the other side, the cable could be passed up and over the grab handle for the 3rd row passengers.

Ive got a lift up hatch on the front of my draws or i would have

Sent from my SM-N910G using Tapatalk

[Rumpig]

Lead looks like length is currently an issue (bit hard to see 100% in that pic), so maybe get a longer lead made up to route it better then how it now is.

[JCAT]

Put the cable in some split tube which makes it stiffer and then wrap around the back handle a couple of times as D4D said. Worked for us.

[dales133]

Ive got it through the back handle at the moment.
Lead lengh isnt an issue ive got plenty to spare was just looking for options.


Sent from my SM-N910G using Tapatalk

[Rumpig]

Ive got it through the back handle at the moment.
Lead lengh isnt an issue ive got plenty to spare was just looking for options.


Sent from my SM-N910G using Tapatalk

if that's the case, then just do like JCAT mentioned to give it added protection, or maybe use a thicker/ more solid non split tubing.

[Herks]

Small bungee cord and a couple of cable ties. Works well on both the 240 and 12 volt leads.

[dales133]

I had a little play with it today but i think i have a plan..
Thanks for all the help and keep it coming.
Open for more advice and hey it may help someone else

Sent from my SM-N910G using Tapatalk

[GGV8Cruza]

I have a key retractor- https://www.officeworks.com.au/shop/officeworks/p/rexel-retractable-metal-key-holder-ac9810702, which I have cable tied on the cable and the other end fixed to my draw unit, works great

GG

[dales133]

I have a key retractor- https://www.officeworks.com.au/shop/officeworks/p/rexel-retractable-metal-key-holder-ac9810702, which I have cable tied on the cable and the other end fixed to my draw unit, works great

GG

That looks like a cool solution.
I found some split tube cable stuff in the shed and was going to have a play at lunchtime ans see what i can come up with, if that fails i might get one of these
Thanks for the suggestions

Sent from my SM-N910G using Tapatalk

[jwb]

I've used both split tube andbthe key do hicky🖒
Works well


cheers

[jwb]

I'd try the key unit attached to that grab handle on the left.

cheers

[Bird]

how do you find getting items out of the tilt slide setup?

It always looks to me like everthing will pile ontop of what you want down teh bottom corner after tilting?

[dales133]

how do you find getting items out of the tilt slide setup?

It always looks to me like everthing will pile ontop of what you want down teh bottom corner after tilting?

They are a bit of a pain in the arse but $450 is alot better than $750 for a msa drop slide.
My fridge is the dual zone so its got 2 baskets so stuff dosnt move as much as the singe zone modle
I might upgrade later on but this was all i could stretch at the time

Sent from my SM-N910G using Tapatalk

[dales133]

So far i put some split cable thbe stuff on it and its much better but will try to sort it out properly on the weekened

Sent from my SM-N910G using Tapatalk