The Random Question of the Day Thread...

[Bird]

So stop looking at Rolls Royce if you've only got a Mini Minor buget

Rolls Royce? Im looking at Corollas. Shes not interested in Ladas or P76s

[xcvator]

Rolls Royce? Im looking at Corollas. Shes not interested in Ladas or P76s

You can get a very good phone for under $500-00, she wants more than that, let her pay the difference, stop being the stooge in the middle.
My current phone is a redmi 4a paid $120-00 3 years ago does everything I need/want, camera could be better, big deal

[#jonesy]

JB catalogue, just a few examples
Mine is the $239 oppo
Paired up with an Aldi $25/month Sim card.  More data than I could ever use. Uses most of the Telstra network (except the more remote towers.

[DandyD]

Rolls Royce? Im looking at Corollas. Shes not interested in Ladas or P76s

I wouldn't say no to a P76 in good condition.

[Bird]

I wouldn't say no to a P76 in good condition.

No P76's, but how about a Moke with an R1 engine for 35k + shipping.. hes been trying to sell it for years
https://www.carsales.com.au/cars/details/1981-leyland-moke-californian-manual/SSE-AD-6690132/?Cr=6

[#jonesy]

You would think that sort of money, the carbon-fibre-sticker dash could all line up.

[Bird]

You would think that sort of money, the carbon-fibre-sticker dash could all line up.

your asking a bit much LMAO!

[Hairs]

Does anyone remember when coppers(NSW, pther ststes may of as well), would hand out small gift vouchers from local businesses to reward Good Driving?
Around Ballina, Lismore & Byron in tbe early 80's this also sponsored by 2LM(local radio station).
Then again, it was a time when there were a heap of unmarked cars. White VH/K Commodores criusing the roads.

[Bird]

Does anyone remember when coppers(NSW, pther ststes may of as well), would hand out small gift vouchers from local businesses to reward Good Driving?

Ummmmmmm no...
I think you been drinkin or something too much... 

[Hairs]

Ummmmmmm no...
I think you been drinkin or something too much... 

Yeah, would seem to be a G up, but it happened.
Reward for doing the right thing ranged from, A Family dinner at a restaurant, movie tickets, free wheel alignment & balance. 
These days we have H/way patrols cruising the highways like Great Whites.
If you can't pickem, suck Shit, they stick out like a cold sore on a whore's lip.

[D4D]

I need to find a 1/4" 4mm long hex socket to fit my torque wrench, I can't seem to find one anywhere, any ideas?

[VKPrado]

Have you tried any of the bicycle online stores as they seem to have the smaller sized tools for bike repairs?

[GeoffA]

I need to find a 1/4" 4mm long hex socket to fit my torque wrench, I can't seem to find one anywhere, any ideas?

Use a std 1/4" drive socket and cut a hex key to suit?

[VKPrado]

Amazon seem to have them.

https://www.amazon.com.au/Capri-Tools-3-0605-Socket-4-Inch/dp/B07CTCXD4T

[D4D]

Use a std 1/4" drive socket and cut a hex key to suit?

Good idea, now to go find a spare 4mm hex key to sacrifice

Amazon seem to have them.

https://www.amazon.com.au/Capri-Tools-3-0605-Socket-4-Inch/dp/B07CTCXD4T

Thanks, I missed those. That'll be plan b.

[GeoffA]

Good idea, now to go find a spare 4mm hex key to sacrifice
....

Can always replace it later....but can you bring yourself to cut one??...

A good excuse to buy more....

[D4D]

Next random question...

I have a new air inflator, it takes a 3/8" NPT male threaded fitting. I only have 1/4" fittings so I need to find a Nitto fitting for it, all I can find is 3/8 BSP thread.

Will this work?
https://www.totaltools.com.au/72158-sonsbeek-nitto-style-plug-adaptor-3-8-bsp-male-thread-2-pk-10040m6

This is the inflator
https://www.parktool.com/product/shop-inflator-inf-2

[VKPrado]

In short no a BSP can not fit into a NPT thread. 

With the 3/8" size you refer to there is 1 thread difference apart from the thread angles being also different.

Somewhere like Pirtek (hydraulic place) might be of assistance to even make up an adapter to go from NPT to BSP.

[D4D]

In short no a BSP can not fit into a NPT thread. 

With the 3/8" size you refer to there is 1 thread difference apart from the thread angles being also different.

Somewhere like Pirtek (hydraulic place) might be of assistance to even make up an adapter to go from NPT to BSP.

Thanks, so I need to find a 3/8" NPT to Nitto fitting...

[Bird]

Am i the only one thats ended up with more Coles reusable bags that they charge you for than Coles

[Troopy_03]

Am i the only one thats ended up with more Coles reusable bags that they charge you for than Coles

Nope, there's about 1,000,000 of em jammed behind the seat and in a storage hatch, in the back of the Troopy. I keep forgetting to take one into the store with me. A mixture of Coles and Aldi bags though. Actually, I think they stopped you re-using the bags in the early days of The Plague didn't they?

Now I just wheel the trolley out and pack them as I unload them into the Troopy.

[chester ver2.0]

Ok question of the day

If you are going to topsoil your lawn (which i am) do you first
Mow the grass really short
Mow it at normal height
Dont mow it at all to hold soil

Thanks brains trust

[VKPrado]

Ok question of the day

If you are going to topsoil your lawn (which i am) do you first
Mow the grass really short
Mow it at normal height
Dont mow it at all to hold soil

Thanks brains trust

I was thinking about this the other night so will be interesting to see what everyone comes up with.

[Spada]

Ok question of the day

If you are going to topsoil your lawn (which i am) do you first
Mow the grass really short
Mow it at normal height
Dont mow it at all to hold soil

Thanks brains trust

I'm no expert, but personally I'd mow it so the growth energy goes into the roots, plug it so your top-dress and moisture can get down to the roots, and then top dress with an enriched top dressing (usually a sand blended with 20% chook poo).

[Spada]

How come a complete air suspension kit with bags, mounts, fittings, hardware and accessories cost's $800..................

And just the 2 bags as replacements for the same kit, without all the mounting bits............ costs $600