Black widow centre divider and top shelf 100 series

[jetcrew]

Hi all,

can anyone with a 100 series and the blackwidow centre divider and top shelf tell me the height between the top shelf and the roof at the edge.

The pics on net seem to indicate that I would not fit chairs up there as the gap is npt large eneough height wise at the back.

I built my last ones , but with the new car and having to buy a brand new barrier as we have rear air con I am being told that I WILL not be taking to it with a grinder.

But I don't want to buy the divider and shelf it I can not fit a camping chair up there.

Any advice appreciated.

Jet

[RWS]

Hi all,

can anyone with a 100 series and the blackwidow centre divider and top shelf tell me the height between the top shelf and the roof at the edge.

The pics on net seem to indicate that I would not fit chairs up there as the gap is npt large eneough height wise at the back.

Theo I'll let you know if it stops raining enough to get out there and measure it...your right though, there isn't a lot of room for chairs up ther unless they fold flat...I carry a small fold up table in that spot.

[RWS]

Not much space there...150mm from the roof to the shelf initially, once past that and inside, there's about 250mm from roof to the shelf...hope this helps.

[jetcrew]

Thanks heaps mate much appreciated

looks like I will be building my own then, as $500 for the divider and shelf is steep and if i can't carry the things I want up there then it's home build time..pressure is on.

seems the black widow half barrier is alot easier to install than the milford from all the threads I,m reading, so the extra $$$ in the purchase price for BW over milford seems to pay for itself at install time.

Thanks agian mate.

Jet