This hurts and will cost a fortune to fix

[oldmate]

Having belted myself in the head pulling nails with vice grips, pliers and the like before, I can say from experience that you need these:
http://www.excaliburtools.com.au/index.php/products/nail-piers/hl1121-510278a7682a3-detail

Does it like a dream, next to no effort even with massive nails, just put them on and rock it over the rounded bit.  I've pulled 4 inch nails out with only the head showing with them.  Took more than one easy movement, but you can give them a few taps with your palm and get even pull screws out if you really have a go when you don't realise that the thing you've grabbed is a screw and not a nail...

I bought mine after I had to pull up the masonite over the kitchen floor, some bugger had put staples in it every couple of mm and it was an absolute pain to pull them all with normal pliers.  Still took forever with the extractors but was much less effort.

These will do it also. Every chippy I know uses something like these.
http://www.tridon.com.au/Products/Product.aspx?SG=10&S=36&G=509&P=64048
Normal pliers just don't work, as theo found out.

[Jason B]

Bloody hell mate! Go straight for the replacement screw ins. Don't give him $4k now + another $12k in two years if you have dramas.

Ouch!

[lino6]

Bloody hell mate! Go straight for the replacement screw ins. Don't give him $4k now + another $12k in two years if you have dramas.

Ouch!

Yep go the screw in's you get better grip on soft ground than the molded's. oh wait, think I got that wrong.....

[Cruiser 105Tvan]

Don't you use screw ins for ice?

[oldmate]

i wouldnt go screw ins, Fathom is in the dental game, i'm sure between his bits and pieces in the boot and my nail gun, we can sort something out for you.

50% off this month also on all new front teeth. only cost ya $2000

[lino6]

i wouldnt go screw ins, Fathom is in the dental game, i'm sure between his bits and pieces in the boot and my nail gun, we can sort something out for you.

50% off this month also on all new front teeth. only cost ya $2000

I can get you some cheap timber to make em out of, how about a bit of treated pine so you don't get termites??

[jetcrew]

update..

well now dentist reckons that a crown veenerr might not last very long and a screw in would be better....Thats bloody great after you put the post in I say..Ok from here on discussions first then $$$ and work done..

So anyway after a bit of a discussion with him the specalist and the good old dental nurse (who i trusted more)

I will get an acrylic crown..

not as strong as enamel one
less than half the price
colour not as good
less than half the price

So the concern is that due to the damage to the tooth the post may fail and hence the whole shebang failing .. so agreed better to go in at a lower $$$ investment if doing a crown

total costs now down to $2200

i am happy with this outcome as he has done 2 fillings on the teeth either side as well, so if the smashed tooth fails in 2 years I will just re assess, but if it fails it is most likely to loose the acyclic rather than the post and filler as the acyclic is weaker so a built in weak point to save the post.

specialist said he has replaced 3 acyrilcs on same patient over 10 years ..but if it was enamel it would have been non repairable after first one.

So i said ..."oh ok bit like CV joints on a GQ ...better to change a CV than whole axle and hub "  for some reason he did not understand.....

Jet
 

[feisty]

Classic. Reminded me of the nimble ad on TV.   'So we have to take the whole sauna out and replace it with an engine'

http://youtu.be/Ozx8fbFLSno

[Frostd]

Come on Theo, where is the photo, or do I need Lara to send me a pic to post.

[jetcrew]

Come on Theo, where is the photo, or do I need Lara to send me a pic to post.

Come on mate I posted a pic earlier ... 

i,ll bring my new smile to the meet 

[oldmate]

Come on Theo, where is the photo, or do I need Lara to send me a pic to post.

Lara sent me one the other day.
This is after he went to his Chinese dentist 

[jetcrew]

god i love that shirt ... lara  bought it for me when we first met...

[oldmate]

god i love that shirt ... lara  bought it for me when we first met...

 

[jetcrew]

well 9 am tomorrow and i have hopefully my last expensive week ..grinding down the filler and making the mould to send to the lab only $650 tomorrow so they are easing up 

Bloody hell this has been monumental in time /pain and $$$

Jet

[oldmate]

well 9 am tomorrow and i have hopefully my last expensive week ..grinding down the filler and making the mould to send to the lab only $650 tomorrow so they are easing up 

Bloody hell this has been monumental in time /pain and $$$

Jet

Can't wait to catch up with you on the weekend, so I can see your million dollar smile 

[Cruiser 105Tvan]

Oldmate, Jetcrew has been a bit shy!

 

[Foo]

It's only money JC

Foo

[Paul (SA)]

All the best with the recovery Jet....

Hope you will still be able to hook into food without it going through the blender first.....

[jetcrew]

Well I have a temporary tooth in there for 10 days until the lab makes my new one

So at least I will have a smile, Lara said she would not be seen with me if I was still missing a tooth so just scraped in on that front.

Jet  

[MR MAC GU]

Don't worry it's not long to Christmas.
Sing...
All I want for Christmas is my two front teeth, my two front teeth, my two front teeth.
Oldmate don't laugh too hard...I remember something you did while working at my place...looks like Harry potter now.


Sent from Behind you...BOO