What would you do differently next time?

Started by Symon, July 30, 2011, 09:43:33 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

9775Andrew

when we travel with others we always cross reference who is bringing what.

we even check who is bringing what cooking gear so you don't have 6 stoves / 6 camp ovens etc
we share fridges ......... one for food and 2 for beer!


saves heaps of room and weight, highly recommend taking Symon's suggestion on board

obviously you have to have communal cooking etc, but its all part of the fun having different groups cooking and the others get a night off
We're Grey Nomads in Training

Alesco

Just as a matter of interest ...
There is a butcher in the Coles Shopping Centre in Mareeba that also cryovacs meat.
Prices are no different from Cairns.
:cheers:
Steve

McGirr

Quote from: 9775Andrew on November 20, 2011, 07:05:13 PM
when we travel with others we always cross reference who is bringing what.

we even check who is bringing what cooking gear so you don't have 6 stoves / 6 camp ovens etc
we share fridges ......... one for food and 2 for beer!


saves heaps of room and weight, highly recommend taking Symon's suggestion on board

obviously you have to have communal cooking etc, but its all part of the fun having different groups cooking and the others get a night off

I agree in part but it depends on the numbers in the group. As we travel in groups from 11 to 18 vehicles and members head off in different directions it is hard to arrange what you do. Agree on some items though...as I always ask who has chainsaws, welders,etc

Mark
Living the dream working our way around Australia.

Ernabella SA, Warburton WA, Mt Barnett Roadhouse in the Kimberley, Peppimenarti NT, Ramingining NT, Gapuwiyak NT, Gunbalanya NT, Bidyadanga WA, Ali Curung NT, Tjuntjuntjara WA. 18 places

https://www.facebook.com/Working-and-Traveling-Australia

9775Andrew

Alesco
good to know as Mareeba is our new base for a while

McGirr

Understandable, we travel in small family or close firend groups of 2 to 4 vehicles, any more than that is a different story, however as Symon suggested you won't need 6 welders

cheers
We're Grey Nomads in Training

McGirr

Quote from: 9775Andrew on November 20, 2011, 08:39:59 PM
Alesco
good to know as Mareeba is our new base for a while

McGirr

Understandable, we travel in small family or close firend groups of 2 to 4 vehicles, any more than that is a different story, however as Symon suggested you won't need 6 welders

cheers

True you would not need that many. As most members split up on the way back from the Cape trip it is hard to decide what not to bring and what to bring.

Mark
Living the dream working our way around Australia.

Ernabella SA, Warburton WA, Mt Barnett Roadhouse in the Kimberley, Peppimenarti NT, Ramingining NT, Gapuwiyak NT, Gunbalanya NT, Bidyadanga WA, Ali Curung NT, Tjuntjuntjara WA. 18 places

https://www.facebook.com/Working-and-Traveling-Australia

Kit_e_kat9



What would you do differently next time?  I'd actually go ...
Kit_e
2010 Hilux SR5 & 2010 Aussie Swag Rover LX
My Blog


Apollo

Quote from: yogi on November 20, 2011, 04:59:48 PM
I don't think all of your camper is stainless ....... unless your Kerry Packer's long lost son ..... lol ...... Seriously though the bit's that tend to break like draw bar, hitch, spring / shock mounts and axles won't be stainless. Happy to be proven wrong though 8)

yogi

Yes Yogi, you are right to a degree, but the box, drawbar and spring mounts are stainless.  I would have hated to think what it would have originally cost. Only the hitch, springs and axle aren't stainless.  Ok, tent and bed base as well.  I may try to do some test welding with a 12 volt system including some stainless, just incase the I ever need it.  Wouldn't have though it would have worked but I will give it a go.

Steve

darrenh

You just use stainless steel rods
I work in the stainless steel game
2006 100 series sahara
2008  Jayco flamingo outback

Gunna Do

Can you still buy Weld-all welding rods (think that was their name).  I used these years ago to weld some stainless bore casing to mild steel stuff.

Would they be an option?

Gunna Do


darrenh

904 series stainless steel rods will weld carbon steel to stainless steel
2006 100 series sahara
2008  Jayco flamingo outback

Apollo


bert56

I think your on to a great idea Diksta.

All it means is that when we split up there is at least one of every item in every group and someone who knows how to use them if required.

Last year I carted way to much food (and forgot the pots, pans and gas), but not enough beer or fuel. This year I will be taking half of what I took last year plus a few pre cooked frozen meals for when I don't want to cook. Great burgers can be had at Archer river, Bramwell junction and Musgrave. Seisa has excellent take away food as well.

This year I will be carrying extra fuel and a lot more refreshments as they do get expensive along the way and in Seisa.

I will have a fairly comprehensive tool kit (screwdrivers, pliers,sockets, spanners up to 19mm etc)this year but I don't think I will  have a welding kit, generator or chainsaw. I am leaving my high lift jack at home and are undecided about the max trax.

I'll bring some hd extension leads in the hope that someone will have some spare power.

Bert

jaycamrie

Last time we went it was me and a mate we went with a couple of families we went self sufficent but it worked out just as cheap and easy to order meals where you could left more room for beer in the fridge ;D