How have you attached your dash mat?

[Snapman007]

I don't want anything permanent and I've tried double sided tape, Velcro and sticky dots with no joy. Each time I've wiped the dash down with isopropanol in case the previous owner used silicon based crap on it but nothing wants to stick long term.
Before I cut some holes in the mat and zip tie it through the vents, is there a better way besides M16 dyna bolts or kemsets?

[oldmate]

sikaflex? or i can bring over my hilti gun with some 70mm nails and some black charges?  failing that, dont clean it?

[Snapman007]

The only thing that works is when the missus is driving while I'm data logging the console fridge temp, is jamming a few empty cans inbetween the dash and windscreen. Also helps with in cab hostility.

[oldmate]

The only thing that works is when the missus is driving while I'm data logging the console fridge temp, is jamming a few empty cans inbetween the dash and windscreen. Also helps with in cab hostility.

so where is your problem then??

[Snapman007]

When I'm driving 

[oldmate]

dont drive.....

problem solved

[D4D]

Dash mat? Must be a QLD thing

[MarkGU]

Dash mat? Must be a QLD thing

its to stop the reflection of of his face coming back at him D4D........if you have seen him you will know 

[cruiser 91]

ive only used zip ties but my dash mat has vent slots, no need to cut holes.

[muzza01]

Go to Kmart and in the Home Storage section, and buy "non slip matting roll". Cheap as chips, cut in to sections and put under your dash mat.

I use them inside the CT with good results I also have them under my floor mats in the car. The Cruza has a vinyl floor and those deep mud grabbing mats use to slide around all of the time until I used this stuff.

[Chris J]

Cable Ties through the vents

[BTMNDR]

Cable Ties through the vents

X 3

[oldmate]

its to stop the reflection of of his face coming back at him D4D........if you have seen him you will know 

Yep agreed, i don't run one

[Snapman007]

Yep agreed, i don't run one

Get fkd x2 ?? That hurt my feelings.



Thanks Muzza, Ive got some of that non slip mat hiding somewhere so I'll give it a try before the zip ties

[Herks]

ive only used zip ties but my dash mat has vent slots, no need to cut holes.

X2

[Snapman007]

ive only used zip ties but my dash mat has vent slots, no need to cut holes.

+1
The op was prolly using his beer brain last night and doesn't realise his mat also has vent slots.