Author Topic: I just don't know!  (Read 3258 times)

0 Members and 1 Guest are viewing this topic.

Offline yumpet

  • Sleeping Bag User
  • *
  • Posts: 30
  • Thanked: 1 times
  • Gender: Male
I just don't know!
« on: May 14, 2013, 07:54:48 PM »
Today I thought I'd get all clever and bought a baintech outlet panel with volt and ammeter built in, it was perfect cause I wanted to monitor the power being put into the system from my solar panels etc so I moved the CT into the battery area and ran the positive through the CT to monitor the input current input and turned it all on and it went FIZZZZZZ and went blank, the CT is rated at 50amp and it says it can handle 30v so I am buggered if I know why it died!

I have checked and double checked the wiring and there is no problem there but i can't think of any other reason it died, it could be a faulty display or CT but has anyone got any other ideas?? I'm really lost!

Chris
04 Patrol dragging a lifestyle platinum on coils

Offline Jon

  • Hard Floor Camper User
  • *****
  • Posts: 1142
  • Thanked: 7 times
  • Gender: Male
  • Bringing rain to every campsite
Re: I just don't know!
« Reply #1 on: May 14, 2013, 07:57:24 PM »
most current shunts go in the negative line in my experience.

Not sure about the baintech thing though...
I got a sweater for Xmas, really wanted a moaner or screamer.

KingBilly

  • Guest
Re: I just don't know!
« Reply #2 on: May 14, 2013, 08:01:36 PM »
OK, I'll ask.  In my shorthand CT = Camper Trailer.  What are you referring to?

KB

Offline yumpet

  • Sleeping Bag User
  • *
  • Posts: 30
  • Thanked: 1 times
  • Gender: Male
Re: I just don't know!
« Reply #3 on: May 14, 2013, 08:10:02 PM »
CT = Current transformer, yeah sorry I can understand that being here :-P

And CT on the neg you say, never thought of that but I'm near 100% sure it was on the pos
04 Patrol dragging a lifestyle platinum on coils

KingBilly

  • Guest
Re: I just don't know!
« Reply #4 on: May 14, 2013, 08:11:58 PM »
Oh, OK.  I've also only heard of a shunt going on the negative but I am certainly no expert.  Somebody more knowledgeable will jump in soon  ;D

KB

Offline Mobi

  • Soft Floor Camper User
  • ****
  • Posts: 290
  • Thanked: 2 times
  • Gender: Male
Re: I just don't know!
« Reply #5 on: May 14, 2013, 08:36:14 PM »
Ok no idea how the baintech works but for voltage readings, you measure between the positive and negative (or power and earth) while current is measured on the power line. Connect the voltage measurement incorrectly will cause terminal damage. Blew a multimeter up doing that once lots of smoke ;D
Cat slave

KingBilly

  • Guest
Re: I just don't know!
« Reply #6 on: May 15, 2013, 09:21:11 AM »
Maybe need to repost in the electrical section  >:D

KB

Offline jwb

  • Hard Top Camper User
  • ******
  • Posts: 2279
  • Thanked: 144 times
  • Gender: Male
Re: Re: I just don't know!
« Reply #7 on: May 15, 2013, 09:46:19 AM »
Maybe need to repost in the electrical section  >:D

KB

And THEN the fight started :-D

Sent from my GT-I9300 using Tapatalk 2

Cheers

Jwb

Offline yumpet

  • Sleeping Bag User
  • *
  • Posts: 30
  • Thanked: 1 times
  • Gender: Male
Re: I just don't know!
« Reply #8 on: May 15, 2013, 06:16:03 PM »
It's all good, my working and understanding was right it was a faulty unit, was relieved to say the least!
04 Patrol dragging a lifestyle platinum on coils

Offline PeaBrainPete

  • Swag User
  • **
  • Posts: 97
  • Gender: Male
I just don't know!
« Reply #9 on: May 15, 2013, 06:49:00 PM »
It's all good, my working and understanding was right it was a faulty unit, was relieved to say the least!
Admit it! You we're scared to go in the electrical forum. I know I am. :)
« Last Edit: May 15, 2013, 06:51:22 PM by PeaBrainPete »
Oooh! Goldfish!

Offline yumpet

  • Sleeping Bag User
  • *
  • Posts: 30
  • Thanked: 1 times
  • Gender: Male
Re: I just don't know!
« Reply #10 on: May 15, 2013, 09:04:32 PM »
lol well I was quietly confident in my ability but was still kinda scared :-P
04 Patrol dragging a lifestyle platinum on coils