MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: feisty on May 13, 2014, 08:52:56 PM
-
Arb garage sale this Saturday. List of items available was published today. Keen on a heavily discounted winch - but then probably so is everyone. My question is did anyone go to last year's sale and what sort of frenzy should I expect.... Replies greatly appreciated.
Sent from my SM-N9005 using Tapatalk
-
Arb garage sale this Saturday. List of items available was published today. Keen on a heavily discounted winch - but then probably so is everyone. My question is did anyone go to last year's sale and what sort of frenzy should I expect.... Replies greatly appreciated.
There is a thread on last years one on here.
Don't get your hopes up..
-
There is a list of the participating stores and the sale items on the website..... Some look heavily discounted and items vary a bit between stores. Not all Arb stores are participating either..... >:(
-
Pretty realistic with my expectations but to make sure no one gets in before me I plan to chain myself to the front door overnight. ....
Sent from my SM-N9005 using Tapatalk
-
Pretty realistic with my expectations but to make sure no one gets in before me I plan to chain myself to the front door overnight...
... your assuming they haven't been sold prior to their mates.
-
That's how it usually works...... they've gotta be good for a free sausage in bread though. Don't they?
Sent from my SM-N9005 using Tapatalk
-
From the ARB web site : the link to PARTICIPATING stores
http://www.arb.com.au/garagesale/ (http://www.arb.com.au/garagesale/)
-
My advise is that if you really want something then make sure you get there before they open. Was very busy last year here in Tasmania at the Launceston store.
I sent the list out to a few friends and they have already gone and visited the store here to make sure the items they are after are the ones that fit and were told it will be a case of first in first served on Saturday morning, just like an ordinary garage sale.
-
My info from last year is they don't sell stuff to mates. I tried it last year.
Get there before it opens, wait at the gate and if you know what you are after, go in (you can run if you are as desperate as some of the other desperados) , find it straight away and buy it.
There will be a crowd there, and most people are after big ticket items such as tents, winches, bull bars.
Some of the other stuff goes slower and if you are after suspension or vehicle specific stuff etc, it would be good to know part numbers as you may need to go through a big pile of stuff in boxes.
-
If anybody is going to Kilsyth please PM me.
I am unable to make it but very interested in acquiring the MSTLP15G 120 Prado MSA Airbag front bucket seat covers.
-
I have found that you have to look carefully at what's on sale. Went to a similar one at a rival 4x4 specialist this year. Only a few items at true sale price to get you in the store and those were stock or clearance items that had to be cleared before end of financial year. I actually found a non sale item more expensive than I had paid a few weeks before. :D
If you can get in early and get the real bargains then it's a bonus. Just have to battle with all the other early shoppers who want the same item. :-\
-
Hi guys, we're definitely not allowing any of the items to be held prior to the sale. That goes for 'mates' and staff as well ;)
I would advise getting their early if there's an item you really want as we've had a lot of interest in the published lists. All stores will be open during normal Saturday trading hours.
Cheers, Sam.
-
I bought a warn 12000 lbs winch last year from the sale,on later inspection I desired to drop it into Mal Leslie for him to give it the once over..........near on $1200 later I had working winch.
The winch was so full of mud and rusty water it was nearly junk......not very happy.
Never again,
Matt
-
If the winch was warm as you say, did you need asbestos gloves or just oven mitts to pick it up?
-
If the winch was warm as you say, did you need asbestos gloves or just oven mitts to pick it up?
Warm not "hot".......... But all fixed now
-
I went to Kilsyth last year. Waited outside the gate with about 50 others. About a dozen ran through the gate once it opened. If there is a special item you really want it's probably best to join the sprinters but there were still bargains to be had by the second wave.
I got a pair of IPF spot lights for about half price.
-
I went to Kilsyth last year. Waited outside the gate with about 50 others. About a dozen ran through the gate once it opened. If there is a special item you really want it's probably best to join the sprinters but there were still bargains to be had by the second wave.
I got a pair of IPF spot lights for about half price.
I think we had a quick chat as we walked down to the shed laughing at everyone one else running.
Matt
-
I think we had a quick chat as we walked down to the shed laughing at everyone one else running.
Matt
Yep, I remember!
-
I went to Kilsyth last year. About a dozen ran through the gate once it opened. If there is a special item you really want it's probably best to join the sprinters
This is why I wont be going.
Cant run no more.
Anyway, I want a quick deflator, might wait till the expo. Hope they have specials on them there.
I think its time I buy one, you guys have talked me into one.
Peter,
sent by telegram stop
-
Warm not "hot".......... But all fixed now
Well done, at least you now definitely know what condition it's in.
-
Anyway, I want a quick deflator, might wait till the expo. Hope they have specials on them there.
go the Ferret
http://www.ferretdeflators.com/ (http://www.ferretdeflators.com/)
-
I bought a warn 12000 lbs winch last year from the sale,on later inspection I desired to drop it into Mal Leslie for him to give it the once over..........near on $1200 later I had working winch.
The winch was so full of mud and rusty water it was nearly junk......not very happy.
Never again,
Matt
What's the old saying 'caveat emptor'? This is at the bottom of their 'Download Full Listings' for the SA sale:
Terms and Conditions
Items included in the garage sale are ex-demo, superseded items, factory seconds or ex-rework and, in most cases, are NOT new. All products are sold as is and kits may not be complete.
Fitting is not available on items purchased at the sale and all items must be taken on the day. We cannot store items for pickup at a later date. Likewise, we’re unable to put sale items on hold prior to the sale day.
-
What's the old saying 'caveat emptor'? This is at the bottom of their 'Download Full Listings' for the SA sale:
Terms and Conditions
Items included in the garage sale are ex-demo, superseded items, factory seconds or ex-rework and, in most cases, are NOT new. All products are sold as is and kits may not be complete.
Fitting is not available on items purchased at the sale and all items must be taken on the day. We cannot store items for pickup at a later date. Likewise, we’re unable to put sale items on hold prior to the sale day.
You are 100% correct, I knew when I bought it that it could work out good or I might get stung.
I had always planned to get the winch serviced and upgraded anyway so even thou I say I'm not happy I'm not exactly unhappy either.
I just don't think they should of sold it the way it was but itis what it is.
Matt
-
This is why I wont be going.
Cant run no more.
Anyway, I want a quick deflator, might wait till the expo. Hope they have specials on them there.
I think its time I buy one, you guys have talked me into one.
Peter,
sent by telegram stop
A tyre deflator is probably the sort of thing you could pick up easily without fighting! The sprinters go for the roof awnings, winches etc. The smaller items are more likely to be available in bulk.
-
V8CRSA/Matt. My apologies, I agree with you, sorry if it didn't come across that way. I too was excited when I saw the sale however I was shocked/surprised when I read the terms n conditions. I just wanted to point out to others and make them aware and maybe ask the question is this new, second hand/recondition or missing parts? Before handing over the hard earned $'s.
Don't get me wrong, so longs as all parties are aware of what they are selling/being sold then everyone should be happy.
Good luck in your Bargain hunting 'Swaggers.
Sent from my iPhone using Tapatalk
-
make sure you do a search on the interwebs for the item you are keen to buy, before you go - some of them are available brand new at lower prices elsewhere.
-
Won't be wasting my time.....
-
Thanks chaps for the heads up. Sounds like you really need to go there beforehand which I haven't got time to do. Might just go along as a spectator....
Sent from my SM-N9005 using Tapatalk
-
Okay. Couldn't resist having a sticky. Didn't partake in the 400m sprint from the main gate. It was more of a light jog.... ended up with an alleged new minus remote warn 9.5xp winch. Supposedly down from $2247 to $1000. Post purchase research seems to indicate that they are an ok winch if maintained but way overpriced. So pretty happy with the result.(http://[IMG]http://img.tapatalk.com/d/14/05/17/9u8y7ype.jpg)
Sent from my SM-N9005 using Tapatalk
-
I have a 9.5xp, it's on it's 2nd vehicle and has done some hard work. Nice pickup for $1000. Take it to Mal Leslie for a 'tune' up and you won't have a problem with it.
-
Thanks d4d. I copied down his details from when you posted them on the prado forum. Sounds like he knows his stuff. Does he do installs?
Sent from my SM-N9005 using Tapatalk
-
Does he do installs?
Yup but he charges big $ for the privilege. It's not that hard just needs to be planned and have the right tools.
-
Fair enough. I've got some rattles and squeaks in the sahara bar I have to get sorted under warranty first. I gather you are suggesting I get it serviced even though it's new.
Sent from my SM-N9005 using Tapatalk
-
I gather you are suggesting I get it serviced even though it's new.
Yep, Mal replaces the hollow braces with solid bar, epoxies the motor and generally water proofs and strengthens it.
Given you don't have a hand controller, I'd suggest not fitting the solenoid box, instead fit an Albright contactor with an in-cab switch.
-
Great. Sounds like has buckets of knowledge when it comes to the model. Oops I bought a wireless remote. Is that a bad thing?????
Sent from my SM-N9005 using Tapatalk
-
Oops I bought a wireless remote. Is that a bad thing?????
Nope I have one also, just means you need to get a little more creative with the install.
-
Ok I'm feeling a little dim witted atm but don't you just plug it into the housing. How does that involve creativity? Thanks for your help and patience btw.
Sent from my SM-N9005 using Tapatalk
-
Ok I'm feeling a little dim witted atm but don't you just plug it into the housing. How does that involve creativity?
You could do that, I cut the plug off and hard wired it in.
(http://blkmav.com/prado/winch2.jpg)
-
I see said the blind man. Thank you!!
Sent from my SM-N9005 using Tapatalk
-
Okay. Couldn't resist having a sticky. Didn't partake in the 400m sprint from the main gate. It was more of a light jog.... ended up with an alleged new minus remote warn 9.5xp winch. Supposedly down from $2247 to $1000. Post purchase research seems to indicate that they are an ok winch if maintained but way overpriced. So pretty happy with the result.
Sent from my SM-N9005 using Tapatalk
Gotta be happy with that.
-
I have a 9.5xp, it's on it's 2nd vehicle and has done some hard work. Nice pickup for $1000. Take it to Mal Leslie for a 'tune' up and you won't have a problem with it.
What he said.
-
Yep, Mal replaces the hollow braces with solid bar, epoxies the motor and generally water proofs and strengthens it.
As above Get his offset tie rods essential IMO. There a great fast winch but if you spool on with paying attention to line wrap. At best you bend the tierods at worst you break the winch housing.
Also it's essential you relocate the drain in the motor if your not getting Mal to seal up the winch.
-
I've read all the horror stories about the drain not being changed. I guess the decision to be made is do I want it 'sealed' to reduce maintenance or left unsealed for ease of maintenance. I'll have a chat to Mal about it I guess. Anyone got any installation instructions? Can't seem to find any on the web.
Sent from my SM-N9005 using Tapatalk
-
I've read all the horror stories about the drain not being changed. I guess the decision to be made is do I want it 'sealed' to reduce maintenance or left unsealed for ease of maintenance. I'll have a chat to Mal about it I guess. Anyone got any installation instructions? Can't seem to find any on the web.
Sent from my SM-N9005 using Tapatalk
I will see if I can find the ones that came with mine. They are not difficult to fit, an extra set of hands help when getting it in place if not I hang mine with a strap of the top tube of the bullbar and hoist it into position.
If you need a hand let me know
Mal is your man, mine has had the magic touch and he really knows his stuff
GG
-
That would be great GG. I'll call or drop into his workshop Monday on the way to work. Installation help would be great. I'm sure I have the ability but sometimes lack the bravado.... I'll let you know.
Sent from my SM-N9005 using Tapatalk
-
I'll call or drop into his workshop Monday on the way to work.
Don't be concerned about the 1950 time warp when you walk into Mal's workshop :)
-
That would be great GG. I'll call or drop into his workshop Monday on the way to work. Installation help would be great. I'm sure I have the ability but sometimes lack the bravado.... I'll let you know.
Sent from my SM-N9005 using Tapatalk
Have a look here, have not dowloaded the manual but it may have the install info
http://warn.com/truck/winches/95xp_winch.shtml (http://warn.com/truck/winches/95xp_winch.shtml)
GG
-
Thanks GG. Just enough info in the manual to get me into trouble. Cheers :)
Sent from my SM-N9005 using Tapatalk
-
I visited Mal today with the winch. Great looking workshop. Exactly the sort of workshop a thinking, old school engineer would have I reckon. Pretty happy with what he said about the winch and very happy with the service. It is the superseeded model with the brazilian bosch motor as opposed to the not so good newer chinese motor. It is new enough to have rubber seals etc that the earlier models do not have.
He is doing all the things D4D and Achjimmy suggested so I'm pretty happy. Although he did suggest that I really need to do something to the front suspension to cope with the weight once the winch is fitted....
Thanks again guys for your help