News:

Please keep your Signature Photo size to a maximum of 100 pixels high.

Main Menu

Quizz. A home made gadget - what is it for. (SOLVED)

Started by austastar, March 21, 2013, 06:22:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

austastar

Hi,
   think along these lines.


I had to make it - nothing like it on the market.


What sort of camping rig do I have - check some of my trip reports.


cheers

evolution

Well you have a tray back pop top on a landrover 110 variant.

Its not for checking the oil in the landy is it? ;D >:D

Is it for locking the ladder into the camper in place properly?

Cheers
Evo
Owner at Regional Campers
Explore a different world!

Kit_e_kat9



Is it for pinning something in place?  Eg: to stop a door swinging in the breeze OR hold a door against (say) the kitchen.

Kit_e
2010 Hilux SR5 & 2010 Aussie Swag Rover LX
My Blog


ezza

 its for a landrover cruise control hook one end on the pedal the other on the seat adjuster  ;D

britts

Stops the roof of your camper coming crashing down and locking you inside when it gets windy, and the gas struts fail. :)
Awesome looking camper by the way I haven't seen one of those before.

4541Andy

Hooks onto Land Rover dash and gear stick to stop said Land rover jumping out of top gear,big improvement over forked stick cut from the bush

idlegossip

I was thinking the roof also initially, but maybe it's to hold the awning a little closer into the camper so the wind doesn't flap it all night...

austastar

Quote from: idlegossip on March 22, 2013, 07:59:00 AM
I was thinking the roof also initially, but maybe it's to hold the awning a little closer into the camper so the wind doesn't flap it all night...


Bingo!

Hi, well done, and here I was thinking it was so obscure it should last a week or so.


Yes, fully extended the awning catches the wind. The manufactures supply two bracing rods from the awning to the base of the camper, and reckon it is good for very strong wind conditions.
However after a night of Southerly busters at Cockle Creek some time ago, I'm very happy with my modification.
Reducing the 'sail' area by half, and the leverage by half seems to do the trick and I feel it is better to avoid rather than absorb the wind energy.



This is where it fits



Flip the strap to one side



The door opens just enough, and rests on an existing bump stop


Thanks for all the replies.


cheers