gday......can anyone give me information on re-gassing or replacing the gas struts on a 2001 supamatic escape.....thanks
There are mobile guys running around Brisbane.
Your location will help in getting suitable replies.
Cheers
Sent from my SM-G930F using Tapatalk
And the design of the strut that you have will define if it can be re-gasssd, re-valved or best to be replaced.
There's a mobile guy in Sydney that I found very helpful, but not much good to you if you're in Melbourne or Perth... ;)
The struts may have a part number, that will allow you to buy them from the many places that sell them.
Try Struts Australia too.
www.strutsaustralia.com.au (http://www.strutsaustralia.com.au)
If your in Melbourne.
Quote from: dgr on September 11, 2017, 12:29:47 PM
gday......can anyone give me information on re-gassing or replacing the gas struts on a 2001 supamatic escape.....thanks
Give us the number off the end. I have a brand new set and no trailer, genuine CUB. No further use.
Bed struts also, foam mattress. Going cheap if they are what you want. PM me.
Ta
John
gday mate.....new to all this stuff.....only thing on the struts is date of manufacture and GS05.....
Where are you located?
Wollongong.....N.S.W.
Woiiongong N.S.W.
Quote from: dgr on September 15, 2017, 06:47:35 AM
gday mate.....new to all this stuff.....only thing on the struts is date of manufacture and GS05.....
PM sent