Hi Everyone,
I just started offering basic stainless camper kitchens (see below). What we would really love is to offer some variety in the market as there isn't alot of selection to people looking to renovate their own camper.
As this is a forum for camper trailer enthusiasts I thought I would be a great place for feed back and fresh ideas.
(http://www.drawerslide.com.au/images/camperkitchenopendimensions.jpg) (http://www.drawerslide.com.au/images/campertrailerkitchencloseddimensions.jpg)
I would think they would need to be reversible if possible
Cheers Mike
Quote from: Manjimike on August 04, 2011, 09:42:37 PM
I would think they would need to be reversible if possible
Cheers Mike
I agree I have been looking at kitchen options for my ct which has a driver side swinging door
I just bought one like this. My suggestion would be to design a low profile tap, that way the unit could be a little bigger in height and allow for a deeper drawer or space beneath the drawer for a chopping board etc.
make sure there are no sharp edges anywhere, I have seen a few that could take a finger off.
Cheers
Quote from: GU Richmake sure there are no sharp edges anywhere, I have seen a few that could take a finger off.
Like in that first photo the corner on the draw where you hook ya fingers to open the draw..
A piece of split rubber tubing over that hand-hold would fix that - Even that rubber spray that was advertised to coat your tool handles with ??
Steve
Do you make these yourself?? We are going to build a trailer based on a few different hard floor models and we are wanting a kitchen setup like the aussie swag - swing around with fold out bençhes and pantry. Are you able to look at doing something like that perhaps?
Cheers
Loshde
Quote from: loshde on September 26, 2011, 10:33:26 AM
Do you make these yourself?? We are going to build a trailer based on a few different hard floor models and we are wanting a kitchen setup like the aussie swag - swing around with fold out bençhes and pantry. Are you able to look at doing something like that perhaps?
Cheers
Loshde
they look like imported from chinlee to me.
but call them and ask
Contact Details:
QLD - (Head Office) (07) 3077 6699
QLD - Fax (07) 3103 8650
NSW (02) 8005 3937
ACT (02) 6176 0056
VIC (03) 9005 2137
TAS (03) 6105 0560
SA (08) 7200 2604
WA (08) 6102 6576
NT (08) 8911 1248
Email: sales@drawerslide.com.au
I have said before; "I swing in a different direction." ;D
Hi,
Yes they are made in China, but I would like to point out with overseas mfr'ing you get what you pay for. We pay slightly extra but in doing so, ensure no corners are cut in construction.
We also offer a larger Australian made version which I will have images to post online soon.
We avoid making what someone already has, but would be happy to explore something different and unique.