Text only | Text with Images

MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: darren on July 22, 2011, 08:30:24 PM

Title: Cable tie base
Post by: darren on July 22, 2011, 08:30:24 PM
Hello masses
I need some help. In the past i have used a metal cable tie base that you glued down with sikaflex. It had a pad on the bottom that had heaps of little holes in it to allow the adhesive to key to. I cant find them for the life of me. If anyone has used them or know where to get them i would be very grateful
Thanks
Darren
Title: Re: Cable tie base
Post by: bullfrog on July 22, 2011, 08:34:12 PM
I know the type you mean Darren. Lately, all I have seen are the plastic sticky backed ones. I'll keep my eyes open for the metal type & who has them.  :cheers:
Title: Re: Cable tie base
Post by: darren on July 22, 2011, 08:37:20 PM
I have a feeling they might be wurth but i cant find them anywhere
Title: Re: Cable tie base
Post by: Symon on July 22, 2011, 08:38:33 PM
Haven't seen those in years, they are all plastic these days.
Title: Re: Cable tie base
Post by: bullfrog on July 22, 2011, 08:42:17 PM
Wurth rep calls into work due in shortly. I can check with him if you like Darren.  :cheers:
Title: Re: Cable tie base
Post by: darren on July 22, 2011, 08:44:04 PM
That would be great mate. Thanks
Title: Re: Cable tie base
Post by: dno on July 22, 2011, 08:57:45 PM
Would something like this be any good ?
Title: Re: Cable tie base
Post by: darren on July 22, 2011, 09:01:34 PM
I have to use them around the inside of the gulwing box, The std adhesive ones dont do a very good job. I am looking for somthing a bit stronger.
Title: Re: Cable tie base
Post by: bullfrog on July 22, 2011, 09:15:01 PM
Would be fiddley, but could you use a spot of Sikaflex on the base of the plastic type after removing the sticky back?? PITA I know, but if you only have a handful to do it might be worth it ?? Juz a thought. :cheers:
Title: Re: Cable tie base
Post by: Tim - Stratford on July 22, 2011, 09:27:34 PM
Darren,

Not metal, but either screw or sika....

http://www.larpro.com.au/larpro/category/78

Tim
Title: Re: Cable tie base
Post by: TheOtherLeft on July 22, 2011, 09:30:21 PM
Jaycar have the plastic ones too.
http://jaycar.com.au/productView.asp?ID=HP1195&keywords=cable+tie+mount&form=KEYWORD (http://jaycar.com.au/productView.asp?ID=HP1195&keywords=cable+tie+mount&form=KEYWORD)
Title: Re: Cable tie base
Post by: gronk on July 22, 2011, 10:35:08 PM
Darren, I used the plastic ones under my gullwing and they have hung on well so far...depends a lot on brand , re, how good the adhesive is..

I have also used P clamps a bit as well ( they use them on trains etc)  think they are made by Panduit....stainless and are silaflexed on..
Title: Re: Cable tie base
Post by: darren on July 23, 2011, 05:05:55 AM
Thanks for that fellas, I have a few leads now.

In the words of Jeff Fenech, 'I love youse all'
Title: Re: Cable tie base
Post by: DANBRI on July 23, 2011, 08:19:25 AM
Used to use them a lot in food manufacturing installations, because the plastic ones can't be picked up if they fall into the product - and someone will eat one  :-[


Title: Re: Cable tie base
Post by: GGV8Cruza on July 23, 2011, 09:06:10 AM
http://www.wurth.com.au/catalogueview.asp?pdf=A02_0803.pdf

http://www.panduit.com/Products/ProductOverviews/ProductSearch/index.htm?Ns=P_ItemSortOrder&Ne=1&R=AM2-M&sid=1315326E8DD4&lastNodeId=ss_prod_cabtiemontsecdevice&N=5000001%20314 3000794

http://www.panduit.com/Products/ProductOverviews/ProductSearch/index.htm?Ns=P_ItemSortOrder&Ne=1&R=EMSK12-4-12-X0&sid=131532823731&lastNodeId=ss_prod_cabtiemontsecdevice&N=5000001%20316 3000774

http://www.source-fixings.co.uk/shop.php?action=subcat_select&subcat_id=14

GG
Text only | Text with Images