Author Topic: Looking for a 2 stage bottle jack for the Cruiser  (Read 3925 times)

0 Members and 1 Guest are viewing this topic.

Offline MrCruza

  • Hard Floor Camper User
  • *****
  • Posts: 1208
  • Thanked: 105 times
  • Gender: Male
Looking for a 2 stage bottle jack for the Cruiser
« on: January 15, 2018, 09:39:57 PM »
Want to replace the standard wind up job with something that's a bit easier to use.
Anyone recommend a good brand/supplier?
Cheers, John.




'12 Cruiser
2020 NextGen Blackline

Offline plusnq

  • Hard Top Camper User
  • ******
  • Posts: 2204
  • Thanked: 233 times
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #1 on: January 15, 2018, 09:47:46 PM »
Length required?

Offline MrCruza

  • Hard Floor Camper User
  • *****
  • Posts: 1208
  • Thanked: 105 times
  • Gender: Male
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #2 on: January 15, 2018, 10:02:09 PM »
Length required?

Looking for around 400mm extended.
Cheers, John.




'12 Cruiser
2020 NextGen Blackline

Offline Cruiser 105Tvan

  • Hard Top Camper User
  • ******
  • Posts: 2239
  • Thanked: 145 times
  • Gender: Male
  • Another Tvan owner.
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #3 on: January 16, 2018, 12:24:14 AM »
An exhaust jack would do all of that.
Just pop the bag under the car fit the pipe on the exhaust and up it goes.
Just need a puncture kit as well, vulcanising patches probably best.
Robert. 
VK3PPC, VZU641.
2000 FZJ105r bars,
HDJ105r Bars F&R, VRS Winch, ATZ. P3's, a cupla 2 ways as well.
and 2009 Canning Tvan pushing.

Offline plusnq

  • Hard Top Camper User
  • ******
  • Posts: 2204
  • Thanked: 233 times
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #4 on: January 16, 2018, 04:31:26 AM »
The Omega jacks are pretty popular in Landrover circles (cue the Land Rover jokes here 😂). For the Discos they need to be small but with a big height extension. I use this one. Obviously they come in different capacities and lengths.

https://www.blackwoods.com.au/part/00946908/jack-bottle-omega-telescopic-hyd-2t

Offline paceman

  • Hard Top Camper User
  • ******
  • Posts: 3226
  • Thanked: 266 times
  • Gender: Male
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #5 on: January 16, 2018, 06:37:00 AM »
landrover bottle jacks are popular...  small, but have good extension...

i got one secondhand for $65 delivered...




low height - 180mm, full height 400mm...


brian from landvehiclespares.net.au was very helpful.

another pic...




Offline Craig Tomkinson

  • Hard Top Camper User
  • ******
  • Posts: 2680
  • Thanked: 479 times
  • Gender: Male
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #6 on: January 16, 2018, 07:14:30 AM »
Hi MrCruza, I bought this one at Supa cheap forgot the price its 6 years old, Its 20cm but I use it with that block of wood, lifts the 80 fully loaded eszy, Craig
1990 80 series 1HZ hill sniffer rebiult with 2 inch lift
1982 Jayco Jaylark  pop up van rebuilt
1999 5m Quintrex King on heavy duty offroad boat trailer

Offline Bird

  • Once Was Lost, now am found
  • Hard Top Camper User
  • ******
  • Posts: I am a geek!!
  • Thanked: 1873 times
  • Gender: Male
  • Life is far too long....
    • My Place.
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #7 on: January 16, 2018, 07:52:07 AM »
Mercedes Sprinter Van jacks are highly regarded on several forums...
-
Click to enlarge

Gone to a new home

Offline HKB Electronics

  • Hard Top Camper User
  • ******
  • Posts: 2173
  • Thanked: 239 times
  • Gender: Male
  • www.hkbelect.com
    • HKB Electronics
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #8 on: January 16, 2018, 09:06:33 AM »
If you only want to jack a wheel I would go for a low profile two stage jack that will fit under the front wishbone and back axle, these
are great as it takes very little effort to jack a wheel to change a tire, if you find you can't get it in under the wishbone with a flat then
digging out a little dirt or running the wheel up a level ramp if you tow solves the problem, you could also carry a small block of wood
for the same purpose. Also good for just jacking the wheel of a van, lot safer than having the car or van jacked up high just
to change a wheel etc.
HKB Electronics, manufacturer of the Alternator Voltage Boosters

Offline glenm64

  • Hard Top Camper User
  • ******
  • Posts: 1948
  • Thanked: 495 times
  • Gender: Male
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #9 on: January 16, 2018, 01:41:07 PM »
I bought a Draper 4T 2 stage hydraulic bottle jack off fleabay for $200 landed. Its compact and lifts to around the 600mm mark by memory. It came from UK, price included postage around 3 years ago. Some sellers postage costs were as much as the jack, others postage were under $20, go figure. Dont know where their stuff is made, but its reasonable quality.
There's a big difference between kneeling down
......... and bending over.

Offline MrCruza

  • Hard Floor Camper User
  • *****
  • Posts: 1208
  • Thanked: 105 times
  • Gender: Male
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #10 on: January 16, 2018, 09:41:36 PM »
Thanks all. Some good ideas there for me to investigate further.   :cheers:
Cheers, John.




'12 Cruiser
2020 NextGen Blackline

Offline Bird

  • Once Was Lost, now am found
  • Hard Top Camper User
  • ******
  • Posts: I am a geek!!
  • Thanked: 1873 times
  • Gender: Male
  • Life is far too long....
    • My Place.
Re: Looking for a 2 stage bottle jack for the Cruiser
« Reply #11 on: January 17, 2018, 08:03:38 AM »
Quote from: MrCruza
Thanks all. Some good ideas there for me to investigate further.   :cheers:
The Sprinter ones are easiest to get from UK sadly, but they do come up here... most of the wreckers almost have waiting lists for em :( I tried for months, but I guess any of those larger vans would be similar/same ???
-
Click to enlarge

Gone to a new home