MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: paceman on October 02, 2018, 03:39:21 PM

Title: supa-peg dry proof... watering down?
Post by: paceman on October 02, 2018, 03:39:21 PM

hi all,

i have a litre of supa-peg's dry proof waterproofing product and i have read some posts on the forum about people using a 1:1 mix of waterproofer and water when applying to canvas using a garden sprayer...

has anyone done this with the supa-peg product?  it says that you clean it off with turps, so not sure if watering down is an option, like it might be with the PVC-consistency waterproofing agents?

would like to hear if anyone has done this with the supa-peg product specifically.  i have a soft floor awning i would like to re-do, but only hav the litre to work with, ATM... don't really want to buy a 5 litre, if i don't need the bulk of it...

Title: Re: supa-peg dry proof... watering down?
Post by: jwb on October 03, 2018, 05:27:00 AM

It seems odd that you mix with water but clean up with Turps?
Something sounds wrong there!?
Maybe a typo??


Sent from my SM-G930F using Tapatalk

Title: Re: supa-peg dry proof... watering down?
Post by: GBC on October 03, 2018, 05:34:13 AM

https://supapeg.com.au/support/dry-proof/

It is flammable and thins with heat.

It most certainly isn’t going to be your garden variety PVA glue based reproofer.
You aren’t going to be adding water.

Looks like good gear.

Title: Re: supa-peg dry proof... watering down?
Post by: paceman on October 03, 2018, 06:19:26 AM

thanks all...

that's what i thinking when i saw the 'turps' part on the label...

i'll use what i have as it is and get some more, if i need it...