MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: xcvator on July 20, 2017, 08:54:46 PM
-
Just wondering which wood heaters (slow combustion ) everybody is using. I'm looking for a free standing heater with a fan booster. I've seen prices from high $100's to $3k or$4k, The rooms would be about 130 square metres with standard ceiling height
cheers Keith :cheers:
-
We installed a Masport freestanding steel unit with 2 speed fan. Made in NZ and shipped over to Aus.
http://masportheating.com.au/products/cast-iron-freestanding/ (http://masportheating.com.au/products/cast-iron-freestanding/)
Don't forget to factor in the cost of a plumber certificated flue installation, without which you may impact your insurance in the case of a house fire.
-
Great Scott your on the Ball :cheers:
-
I've got a coonara bay window job. Still going strong after 18 Ballarat winters.
Sent from my iPad using Tapatalk
-
I replaced an old second hand Ozburn Stove (Canadian Manufacture.) with a Eureka Stove called a 'Nugget'.
http://gason.com.au/eureka-home (http://gason.com.au/eureka-home)
Works really well, came fitted with a 3 speed electric fan as part of the heater.
Nice deep firebox too.
All in all, very happy. Iit's not instant heat like a Gas stove, but once it gets going it works well.
Local Mower Shop has them at Yarra Junction.
-
We just installed a Lopi cape cod. Not cheap (5000) but the best on the market. Cast iron exterior that really radiates the heat with a fan booster to help. Burns all night too
-
Another thing I did Keith was installed ducting from above the wood heater to the kids rooms with an inline fan which is awesome for transferring heat through the house.
-
I have used one of these for that last 6 years, best ever, lots of heat and economical with the wood usage.
Greg
http://www.eurofireplaces.com.au/ (http://www.eurofireplaces.com.au/)
-
I have used one of these for that last 6 years, best ever, lots of heat and economical with the wood usage.
Greg
http://www.eurofireplaces.com.au/ (http://www.eurofireplaces.com.au/)
We have the same. Very economical and burns very clean with little ash left at the end.
We also have air transfer ducts set on a thermostat to push warmer air around the house
GG
Sent from my SM-G950F using Tapatalk
-
I've a Masport free standing cast iron firebox combustion heater, and its now on it's 27th Winter! It runs 24/7 from sometime in May through to September and at either end of the cooler months is lit at night. So about 6 months use, or about 180 days each year. That's 4860 days!!! For memory it was about $1600 installed, so it's cost me about $60.00 a year or $0.33 a day. It's longevity comes from it having a cast iron firebox rather than mild steel, which burn out. Some of the cheapies with a 5 year warranty don't make it through their 6th year!!!
-
We replaced ours with one from Mr Stoves. Vogue. Locally made, distributed and fitted. $2500. Has a 3 speed fan. I think it is a very good investment. Make sure you ask about the hidden adjuster for the full length control of the air intake.
-
Bought of eBay from a local seller their Jøtul F 8 TD for $400.
No Flue, just about to have it installed and passed by the plumber.
What I've read, in NSW you need a plumber to certify that it meets AS(Build Code)
Been told Your insurance company will wipe you if your place burns down and the fire box/place isn't certified.
Ours is cast iron, http://jotul.com/au/products/classic/jotul-f-8 (http://jotul.com/au/products/classic/jotul-f-8)
Fysh has been up me for a couple of years now to get it finished. :-[
-
I will understand if you find this suggestion wildly unattractive.
There are heaters called rocket stove mass heaters that are the most efficient way to heat a space. They are (in Australia) a build it yourself proposition and I suspect they do not comply with building regs simply because they are unusual and don't have the engineering reports that govt departments love. There are a lot of them built and because you do it yourself you are responsible for making it safe.
The advantages are that they burn the fuel at a really high temperature so use all the energy in the wood (no smoke and VERY efficient). Heat is radiated into the room and also used to heat a "mass". This means that the heat is released over many hours.
You use small fires a few times a day, this heats the mass that releases heat 24/7.
Disadvantages are that they require a heavy mass that may not fit in your house/decore. They are self build and non standard so this may upset people (insurers, councils etc)
Some links https://permies.com/t/40993/digital-market/digital-market/Ernie-Erica-Wisner-Rocket-Mass (https://permies.com/t/40993/digital-market/digital-market/Ernie-Erica-Wisner-Rocket-Mass)
https://permies.com/f/125/rocket-stoves (https://permies.com/f/125/rocket-stoves)
http://donkey32.proboards.com/board/3/rocket-stoves-heating (http://donkey32.proboards.com/board/3/rocket-stoves-heating)
-
Common in europe, the parents in law have them in some of the rental homes they run in the mountains in Austria.
http://www.lowtechmagazine.com/2008/12/tile-stoves.html
Sent from my SM-T815Y using Tapatalk
-
Depends what whether ya want a convection or Radiant wood heater. If radiant have a look at the Ned Kelly heaters made in Daylesford Vic
Swannie