MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: Brodie Tas on April 28, 2017, 08:46:39 PM
-
Any made up there own levelling ramps for there camper? Pictures would be good
Thanks
-
A few pieces of treated pine 200x45 with ramps on either end. One a single piece, the second has two pieces joined. fits in the jerry can holder
GG
-
A few pieces of treated pine 200x45 with ramps on either end. One a single piece, the second has two pieces joined. fits in the jerry can holder
GG
x 2, exactly what we have also. The leading edges are cut on a 45° bevel and we have a slightly smaller piece on the off chance that a bit extra height is needed.
-
Ive thiught about it but i dont think its worth the time or materials for the cost you can buy them.
Sent from my SM-N910G using Tapatalk
-
A couple of pieces of wood off cuts
-
MaxTrax if you're carrying them. Not suggesting you'd buy them just for this though....
-
Air bag suspension.
Cheers Glen
-
Before that shovel and a couple of pieces of laminated scaff planks.
Cheers Glen
-
Thanks guys I just grab some framing of cuts from work, like the air bag idea but a bit much for my trailer
-
Chain saw and a green tree works for me .
-
Another way to do it https://www.youtube.com/watch?v=x19Wsx2OSz8 (https://www.youtube.com/watch?v=x19Wsx2OSz8)
Also toyed with the idea of fitting a pair of Air shocks and individual air lines ..
-
Bottle jack...
-
Shovel to dig a hole, when on soft ground. Let a tyre down, when on hard ground....
I bought one of those caravan levelling ramps from Aldi ($20) 4 years ago.
Used it once.
Also got a small stack of 200X200 25mm plywood (with a coat of decking oil) for chocks, stabilizer feet etc.
Sent from my SM-G900I using Tapatalk
-
I carry some bits of 35x70 in the wood basket on the top of the tool box... Only any good if the non fold out side needs to be raised, due to the tent fall...
Otherwise, I dig a hole/let down the other side tyre
Sent from my Nexus 6P using Tapatalk
-
Chain saw and a green tree works for me .
Greenies hate you no doubt... ;D ;D ;D ;D
Love it :cup:
-
Ive thiught about it but i dont think its worth the time or materials for the cost you can buy them.
Sent from my SM-N910G using Tapatalk
x eleventy
-
Greenies hate you no doubt... ;D ;D ;D ;D
Love it :cup:
I always cut the rest of the tree up and leave it behind , when it dries out someone gets free pre cut fire wood .
-
Chain saw and a green tree Greenie works for me .
Fixed it for you, although it will stink a bit :D >:D
-
Fixed it for you, although it will stink a bit :D >:D
Haha :cheers:
-
Fixed it for you, although it will stink a bit :D >:D
:cup: :cup: :cup:
-
Used to have a few off cuts of timber years ago, not worth the effort when you can use a plastic ramp instead.....they are lighter, don't get heavier when it rains, don't split when they dry out, no splinters and are just easy to use. Find someone else that wants one and go halves in a set, that's what we did.
-
The wood off its come in handy with dual axle and independent suspension
Swannie
-
Not sure I trust a flat piece of wood when on a back/front slope as well as crossways. Those commercial ramps are also effective as chocks. I always chock, and it nearly always settles into at least one chock when it lifts off the hitch.