MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: Steffo1 on February 14, 2017, 02:20:20 PM

Title: Bolts for Awning Spreaders
Post by: Steffo1 on February 14, 2017, 02:20:20 PM
I need half a doz of these bolts shown in the pic. I'm sort of Nth Brissie & wondering if a normal van place would stock them.
Hmm, just thought of Adam at Green RV whilst typing.
Title: Re: Screws for Awning Spreaders
Post by: edz on February 14, 2017, 02:59:17 PM
Bumblings should have them if not a local hardware or bolt place  mob .Caravan mobs will want to sell you the plastic fitting and screw complete more than likely ... .
 There just  gal slotted mushroom heads metal thread screws and wing nuts about  M6 size [ possible M4 ? ] by the look of it and 25mm to 30mm long or the AF equivellent  could be 1" 1/4  x  5/16 instead of 1/4 .
https://www.bunnings.com.au/romak-m6-x-35mm-zinc-plated-metal-thread-bolt-and-nut-5-pack_p2251413 (https://www.bunnings.com.au/romak-m6-x-35mm-zinc-plated-metal-thread-bolt-and-nut-5-pack_p2251413)
https://www.bunnings.com.au/romak-m6-stainless-steel-316-wing-nuts-3-pack_p1100816 (https://www.bunnings.com.au/romak-m6-stainless-steel-316-wing-nuts-3-pack_p1100816)
Title: Re: Screws for Awning Spreaders
Post by: Bird on February 14, 2017, 03:04:51 PM
or any bolt place
Title: Re: Screws for Awning Spreaders
Post by: Steffo1 on February 14, 2017, 03:56:15 PM
They're hex headed under the round head to stop them turning in the bracket.
Title: Re: Screws for Awning Spreaders
Post by: RebsWA on February 14, 2017, 05:24:55 PM
Quote from: Steffo1 on February 14, 2017, 03:56:15 PM
They're hex headed under the round head to stop them turning in the bracket.

You might find they are square under the domed head.   ;D
Title: Re: Screws for Awning Spreaders
Post by: Steffo1 on February 14, 2017, 05:28:23 PM
Quote from: RebsWA on February 14, 2017, 05:24:55 PM
You might find they are square under the domed head.   ;D
Yes, yes, alright!. I did think that after I typed but didn't think anyone would pick up on it  :-[ :-[ :-[  ;D ;D ;D
Steve
Title: Re: Screws for Awning Spreaders
Post by: RebsWA on February 14, 2017, 05:31:09 PM
Sorry Steve
Title: Re: Bolts for Awning Spreaders
Post by: Cruiser 105Tvan on February 14, 2017, 07:40:02 PM
I'm with RebsWA on this one.

Could be 1/4" Whitworth Coach bolts approx 25mm. (1") Long with butterfly nut possibly.