MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: bog04 on August 31, 2015, 11:40:22 AM
-
Well I'm thinking of putting a set of rear drawers in the back of my Dmax.i like feed back on what people have,what runners and value for money
Thanks in advance
-
Hey mate I got a dmax and made my own. It probably cost $200-300 or thereabouts and a weekend but turned out well
I couldn't justify the price tag of some of the brands I got quoted for which were in the vicinity of $2k
-
I brought a 2nd hand set of Outback Solution drawers from Gumtree.
Have you checked out eBay / Gumtree?
-
Hey mate I got a dmax and made my own. It probably cost $200-300 or thereabouts and a weekend but turned out well
I couldn't justify the price tag of some of the brands I got quoted for which were in the vicinity of $2k
have you got some more details/pics of what you came up with?
materials, fittings to attach to ute tub?
-
I got the materials from bunnings
12mm ply
soft close draw slides
marine carpet
hinges/knobs
screws etc
Basic design is one sliding draw, one waeco fridge slide which I already had, two small pockets and two other storage compartments. There is also a gab between the tub and the draws where I usually stash snatch straps etc which fit nicely down there. I also wired up a switch panel and drilled that on the tub
Here are some pics, might be a little out of order
-
and more
-
I got the materials from bunnings
12mm ply
soft close draw slides
marine carpet
hinges/knobs
screws etc
Basic design is one sliding draw, one waeco fridge slide which I already had, two small pockets and two other storage compartments. There is also a gab between the tub and the draws where I usually stash snatch straps etc which fit nicely down there. I also wired up a switch panel and drilled that on the tub
Here are some pics, might be a little out of order
thanks for the pics... how did you attach the base to the tub?
-
I didn't want to drill into the tub, basically when I put the base down it hugs the sides of the tub so tight it needed a good hit will the mallet to get it in. Had to fiddle it a bit with sanding sides and things down to make it fit nicely but it definitely doesn't move.
-
If you use google sketchup you can design (and even better cut to size) off your design. Its super simple to use and free.
Instead of drawer slides consider using HDPE strips from sheets like these;
http://www.theplasticshop.co.uk/polyethylene-sheet-hdpe-10mm-12mm-15mm-20mm-25mm-30mm-thick-3606-0.html (http://www.theplasticshop.co.uk/polyethylene-sheet-hdpe-10mm-12mm-15mm-20mm-25mm-30mm-thick-3606-0.html)
If you find a place that uses them you can buy offcuts pretty cheap. Use two 10mm strips against each other with each one rebated into the ply halfway. (15mm ply means you end up with 7mm of rebate on each and a gap of 6mm per drawer.
If you need a hand with sketchup design if you give me your dimensions I can do a draft and send it to you to finish off.
-
Thanks,it's good to talk to people who have them,I'm thinking the drifta makes a good unit from what I have read.does anyone have these
-
I hear drifta are quality with all their products.
Also see the 4wd supacentra are doing draws for about $800 for Utes. Titan draws I think they are called. No idea on the quality
-
(http://images.tapatalk-cdn.com/15/08/31/86aa0d2a4f6a9733b9863af0e33f1106.jpg)
These are mine. I got the fridge slide, fridge divider, kitchen on the right, large draw on the right (table above), side wings and 55lt water tank up near the head wall.
I got tie down points which I use for the storage box from my old CT kitchen.
Sent from my iPhone using the Tappy thing
-
Guessing you don't see much in the mirror
-
Guessing you don't see much in the mirror
Not when we going away! I remove the fridge, fridge slide, fridge divider and storage box when driving around town.
-
(http://images.tapatalk-cdn.com/15/08/31/1e0373c7fede774658541199b4f575b7.jpg)
Better pic
(http://images.tapatalk-cdn.com/15/08/31/38a3222556c7729d1b9c603f40653ce3.jpg)
Kitchen out
Sent from my iPhone using the Tappy thing
-
Well after a lot of searching and talking to a few people on here and at different parks I got a set of drifta.what can I say great service and a great product and very well priced.i recommend anyone thinking of getting a set of drawers have a look at drifta
Thanks to everyone who helped me in my search
-
:worthles:
-
Great to hear. Love the drifta setup in my Colorado. Mark listened to exactly what I wanted and the quality is great. My old man was even that impressed he has drifta installing a set up in his jeep next month
-
Well I'm thinking of putting a set of rear drawers in the back of my Dmax.i like feed back on what people have,what runners and value for money
Thanks in advance
Don't compromise on quality. Go Drifta, they are made to order, teflon runners are brilliant and they fit like a glove.
-
Well after a lot of searching and talking to a few people on here and at different parks I got a set of drifta.what can I say great service and a great product and very well priced.i recommend anyone thinking of getting a set of drawers have a look at drifta
Thanks to everyone who helped me in my search
Sorry, missed your post. Good choice, I'm sure you'll be happy.