MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: Ynot on April 12, 2014, 01:08:54 PM

Title: Ozhitch with Level Riders (weight Distribution)
Post by: Ynot on April 12, 2014, 01:08:54 PM

Hi all, for those with swing rear doors that have trouble with the door clearance on a hayman reece weight distribution bars, you can get a ozhitch to fit these bars.

Door clears the hitch easy now but I will need to put a bend in the handbrake so it sits lower.

(http://img.tapatalk.com/d/14/04/12/ajahy6en.jpg)(http://img.tapatalk.com/d/14/04/12/yma8evud.jpg)(http://img.tapatalk.com/d/14/04/12/tunany6a.jpg)




Sent from my iPhone using Tapatalk

Title: Re: Ozhitch with Level Riders (weight Distribution)
Post by: Chris-Vi on April 12, 2014, 07:13:36 PM

Punch the pin out that is stopping the hand brake going right down. That should solve the problem of bending it.  :cheers:

Title: Re: Ozhitch with Level Riders (weight Distribution)
Post by: Ynot on April 13, 2014, 07:48:42 PM

Yeh, I will look at that, a mate just offered to bring me home some solid alloy spacers to drop the height but if the cable has enough range your idea might work and is easier.
Cheers


Sent from my iPad using Tapatalk HD

Title: Re: Ozhitch with Level Riders (weight Distribution)
Post by: Cruiser 105Tvan on April 13, 2014, 07:55:50 PM

I did this with my Track Tvan..
It looks like the same sort of hand brake lever.
Theres a roll-pin through the ratchet edged mounting plate.
It's better to take the lever out if you have the time.
But it is possible to push it out 'in situ.'.