Affordable 4x4 drawers (Melbourne )

[4800gu]

universal 2 drawer system.Fits a variety of vehicles 1080wide x 920 long x 200 high $450 (drill holes in the bottom of the drawer and fit yourself)also available 240 high ($520)
Drawer systems built to order
For your 4x4 /SUV/ camper trailer
Know what size you want but not confident to build it?
Send your dimensions and I'll give you a price.

Built from ply Glued and screwed
45 kg drawer slides ( can be fitted with a second set to double capacity)
Stainless steel lockable paddle handles
Covered in charcoal automotive fabric.

All units are quality built
Using quality products.

Pick up is Dandenong
Or will freight at buyers expense
Email :actionbobcat@optusnet.com

[Swannie]

a timely post. Do you have a website or at least photos of your work?
Swannie

[4800gu]

Hi Swannie,
I'm having trouble getting photos up at the moment ,
If you send me an email address I will send some photos until I get it sorted.
Cheers Andrew

[4800gu]

1050wide x 1000 long x 275 high
$600

[D4D]

Almost

[Mace]

They look good. Perhaps an indicative price range on say a few standard vehicles, patrol, prado, pajero, cruiser?

Oh, and welcome aboard.

[4800gu]

Hi Mace
thanks for the welcome message
and thanks to D4D for helping post the photo .
i will learn how to post photos properly eventually.

i have been building drawer systems for along time for my self and mates
most of them have been nissan patrols, im just starting to sell a few more mostly as a hobby between jobs.
so at the moment i cant offer specific systems for specific vehicles. but i can build to size and  i  believe 
my prices are good.
In the next few days i will be trying to put up some more photos with some prices.
i have 9 different units built and ready for sale that range from small single drawers to larger 2drawer systems which i will post photos with prices .

cheers Andrew

[4800gu]

Suits Gu Patrol
Has cavity behind left side drawer ,can be used for second battery ( especially 4.8 patrol with no room under the bonnet) or can be used to access child restraint point.
$750 with or without cavity ( includes wings)

(Others will be available as I get vehicles to make templates off )

[Bird]

Are these the bestoffroad ones Jim makes? www.bestoffroad.net.au

[4800gu]

 These are made by Andrew been selling on eBay
And starting to advertise a bit more.

[4800gu]

[4800gu]

[shrek4]

Watching with great interest. I like that last photo with the table.

Have you done a Pajero (NT Exceed) with full wings and access to child restraints?

I'm very interested, looking also at the Drifta drawers.

Oh, shipping to Adelaide, is that possible?

[4800gu]

I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.

[shrek4]

I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.

Cool.

5087, Windsor Gardens.

[brickiematt]

Watching with great interest. I like that last photo with the table.

Have you done a Pajero (NT Exceed) with full wings and access to child restraints?

I'm very interested, looking also at the Drifta drawers.

Oh, shipping to Adelaide, is that possible?

I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.

I'd also be interested in prices for the Paj. Can you do fridge slides on top of the drawers?
I'll happily volunteer the use of my NT for a pattern if needs be

Cheers
Matt

[tennismark]

You had me at hello
I'd be keen fora price on a single draw with the wings for a 100 series. I'll get the dimensions later, but looking to have it high enough that when the back seat is down,it can be a sleeping platform.
Would you do teflon runners instead of the traditional runners? Similar to Drifta draws, they seem to have more draw space than when with a normal runner.

[D4D]

Hey mate, nice workmanship on the drawers, the carpet laying looks great. One thing I would suggest is where you can see the raw wood, give it a coat or 2 of flat black paint. It will make it blend in and look great.

[4800gu]

You had me at hello
I'd be keen fora price on a single draw with the wings for a 100 series. I'll get the dimensions later, but looking to have it high enough that when the back seat is down,it can be a sleeping platform.
Would you do teflon runners instead of the traditional runners? Similar to Drifta draws, they seem to have more draw space than when with a normal runner.

A single drawer around 1000 long x 275 high x 540 wide would be $425
Plus wings for a single drawer $75.
I will have a look into the Teflon slides and get back to you.
Cheers Andrew

[4800gu]

Hey mate, nice workmanship on the drawers, the carpet laying looks great. One thing I would suggest is where you can see the raw wood, give it a coat or 2 of flat black paint. It will make it blend in and look great.

Thanks mate it's good to get a bit of feed back
I will look into it.
Cheers Andrew

[4800gu]

I'd also be interested in prices for the Paj. Can you do fridge slides on top of the drawers?
I'll happily volunteer the use of my NT for a pattern if needs be

Cheers
Matt

Hi Matt
 I can do a fridge slide on top ,it would look like the one on the single drawer in my add,
Prices would be 2 drawer drawer  system $600.  Size roughly 1100 w x 1000 l x 275 h
                       Wings                             $150
                       Table.                             $100
                       Fridge slide built in.         $200
If your interested and local I might take you up on the offer of using you vehicle.
Cheers Andrew

[tennismark]

A single drawer around 1000 long x 275 high x 540 wide would be $425
Plus wings for a single drawer $75.
I will have a look into the Teflon slides and get back to you.
Cheers Andrew

This sounds better and better"
Let me know about the Teflon strips, and what would be the turn around time if I pulled the trigger next week?

[brickiematt]

Hi Matt
 I can do a fridge slide on top ,it would look like the one on the single drawer in my add,
Prices would be 2 drawer drawer  system $600.  Size roughly 1100 w x 1000 l x 275 h
                       Wings                             $150
                       Table.                             $100
                       Fridge slide built in.         $200
If your interested and local I might take you up on the offer of using you vehicle.
Cheers Andrew

Cheers Andrew
PM sent

[flindersroses]

I have a set of these draws I purchased a single draw off Andrew about 4mths ago and they are of the highest quality. Gee the bloke even delivered them to my house in Rosebud for no charge. Great guy, great product, great service. If your thinking about getting a set go for it.

Cheers , Brenno.

[Swannie]

Have any blokes on Myswag bought these drawers since andrew started posting?
Swannie