MySwag.org The Off-road Camper Trailer Forum

The Trader => Showroom Floor => Topic started by: 4800gu on November 29, 2013, 06:18:41 PM

Title: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 29, 2013, 06:18:41 PM
(http://i784.photobucket.com/albums/yy128/4800GU/drawerssystems3075.jpg)
universal 2 drawer system.Fits a variety of vehicles 1080wide x 920 long x 200 high $450 (drill holes in the bottom of the drawer and fit yourself)also available 240 high ($520)(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0544.jpg)(http://i784.photobucket.com/albums/yy128/4800GU/bc1410737e4868d7f744e671287e558e.jpg)
Drawer systems built to order
For your 4x4 /SUV/ camper trailer
Know what size you want but not confident to build it?
Send your dimensions and I'll give you a price.

Built from ply Glued and screwed
45 kg drawer slides ( can be fitted with a second set to double capacity)
Stainless steel lockable paddle handles
Covered in charcoal automotive fabric.

All units are quality built
Using quality products.

Pick up is Dandenong
Or will freight at buyers expense
Email :actionbobcat@optusnet.com
(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0641.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Swannie on November 29, 2013, 06:22:54 PM
a timely post. Do you have a website or at least photos of your work?
Swannie
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 29, 2013, 06:50:29 PM
Hi Swannie,
I'm having trouble getting photos up at the moment ,
If you send me an email address I will send some photos until I get it sorted.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 29, 2013, 08:10:24 PM
(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0653.jpg)
1050wide x 1000 long x 275 high
$600
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: D4D on November 29, 2013, 08:11:49 PM
Almost

(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0654.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Mace on November 29, 2013, 08:15:49 PM
They look good. Perhaps an indicative price range on say a few standard vehicles, patrol, prado, pajero, cruiser?

Oh, and welcome aboard.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 29, 2013, 08:41:15 PM
Hi Mace
thanks for the welcome message
and thanks to D4D for helping post the photo .
i will learn how to post photos properly eventually.

i have been building drawer systems for along time for my self and mates
most of them have been nissan patrols, im just starting to sell a few more mostly as a hobby between jobs.
so at the moment i cant offer specific systems for specific vehicles. but i can build to size and  i  believe 
my prices are good.
In the next few days i will be trying to put up some more photos with some prices.
i have 9 different units built and ready for sale that range from small single drawers to larger 2drawer systems which i will post photos with prices .

cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 30, 2013, 03:37:18 PM
(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0647.jpg)
Suits Gu Patrol
Has cavity behind left side drawer ,can be used for second battery ( especially 4.8 patrol with no room under the bonnet) or can be used to access child restraint point.
$750 with or without cavity ( includes wings)

(Others will be available as I get vehicles to make templates off )
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Bird on November 30, 2013, 03:53:22 PM
Are these the bestoffroad ones Jim makes? www.bestoffroad.net.au (http://www.bestoffroad.net.au)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 30, 2013, 04:01:58 PM
 These are made by Andrew been selling on eBay
And starting to advertise a bit more.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 30, 2013, 04:12:18 PM
(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0679.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 30, 2013, 04:14:56 PM
(http://i784.photobucket.com/albums/yy128/4800GU/IMG_0667.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: shrek4 on November 30, 2013, 04:19:11 PM
Watching with great interest. I like that last photo with the table.

Have you done a Pajero (NT Exceed) with full wings and access to child restraints?

I'm very interested, looking also at the Drifta drawers.

Oh, shipping to Adelaide, is that possible?
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on November 30, 2013, 04:30:45 PM
I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.

Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: shrek4 on November 30, 2013, 04:38:16 PM
I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.

Cool.

5087, Windsor Gardens.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: brickiematt on November 30, 2013, 07:45:14 PM
Watching with great interest. I like that last photo with the table.

Have you done a Pajero (NT Exceed) with full wings and access to child restraints?

I'm very interested, looking also at the Drifta drawers.

Oh, shipping to Adelaide, is that possible?

I haven't done one for a Pajero yet .
but may be able to get one to do a pattern
.will have a look early next week
if you send your postcode I will give you a quote on drawers and postage during this week.



I'd also be interested in prices for the Paj. Can you do fridge slides on top of the drawers?
I'll happily volunteer the use of my NT for a pattern if needs be ;D

Cheers
Matt
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: tennismark on December 01, 2013, 08:22:19 AM
You had me at hello :laugh:
I'd be keen fora price on a single draw with the wings for a 100 series. I'll get the dimensions later, but looking to have it high enough that when the back seat is down,it can be a sleeping platform.
Would you do teflon runners instead of the traditional runners? Similar to Drifta draws, they seem to have more draw space than when with a normal runner.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: D4D on December 01, 2013, 09:05:09 AM
Hey mate, nice workmanship on the drawers, the carpet laying looks great. One thing I would suggest is where you can see the raw wood, give it a coat or 2 of flat black paint. It will make it blend in and look great.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on December 01, 2013, 09:24:42 AM
You had me at hello :laugh:
I'd be keen fora price on a single draw with the wings for a 100 series. I'll get the dimensions later, but looking to have it high enough that when the back seat is down,it can be a sleeping platform.
Would you do teflon runners instead of the traditional runners? Similar to Drifta draws, they seem to have more draw space than when with a normal runner.
A single drawer around 1000 long x 275 high x 540 wide would be $425
Plus wings for a single drawer $75.
I will have a look into the Teflon slides and get back to you.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on December 01, 2013, 09:36:57 AM
Hey mate, nice workmanship on the drawers, the carpet laying looks great. One thing I would suggest is where you can see the raw wood, give it a coat or 2 of flat black paint. It will make it blend in and look great.
Thanks mate it's good to get a bit of feed back
I will look into it.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on December 01, 2013, 09:50:53 AM
I'd also be interested in prices for the Paj. Can you do fridge slides on top of the drawers?
I'll happily volunteer the use of my NT for a pattern if needs be ;D

Cheers
Matt
Hi Matt
 I can do a fridge slide on top ,it would look like the one on the single drawer in my add,
Prices would be 2 drawer drawer  system $600.  Size roughly 1100 w x 1000 l x 275 h
                       Wings                             $150
                       Table.                             $100
                       Fridge slide built in.         $200
If your interested and local I might take you up on the offer of using you vehicle.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: tennismark on December 01, 2013, 01:50:56 PM
A single drawer around 1000 long x 275 high x 540 wide would be $425
Plus wings for a single drawer $75.
I will have a look into the Teflon slides and get back to you.
Cheers Andrew
This sounds better and better"
Let me know about the Teflon strips, and what would be the turn around time if I pulled the trigger next week?
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: brickiematt on December 01, 2013, 06:01:07 PM
Hi Matt
 I can do a fridge slide on top ,it would look like the one on the single drawer in my add,
Prices would be 2 drawer drawer  system $600.  Size roughly 1100 w x 1000 l x 275 h
                       Wings                             $150
                       Table.                             $100
                       Fridge slide built in.         $200
If your interested and local I might take you up on the offer of using you vehicle.
Cheers Andrew

Cheers Andrew
PM sent
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: flindersroses on December 02, 2013, 08:27:33 AM
I have a set of these draws I purchased a single draw off Andrew about 4mths ago and they are of the highest quality. Gee the bloke even delivered them to my house in Rosebud for no charge. Great guy, great product, great service. If your thinking about getting a set go for it.

Cheers , Brenno. :cup:
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Swannie on March 18, 2014, 07:44:58 PM
Have any blokes on Myswag bought these drawers since andrew started posting?
Swannie
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: DrewXT on March 18, 2014, 08:56:13 PM
what would a set of side by sides for an Amarok be worth?  preferably with 125kg slides (I like to over-engineer everything)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: fuji on March 20, 2014, 08:30:32 PM
Wish I knew about your drawers before I bought the Drifta.  They look really good.
Wayne
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: DrewXT on March 20, 2014, 11:49:09 PM
Issues with the Drifta drawers @fuji?

Sent from my GT-I9505 using Tapatalk

Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: evolution on March 21, 2014, 07:24:55 PM
Issues with the Drifta drawers @fuji?

Sent from my GT-I9505 using Tapatalk
Lack of table and seems to be addicted to cordial.  >:D :angel:

(Sorry buddy, couldn't help myself! )

Cheers
Evo
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Swannie on March 21, 2014, 07:26:26 PM
Lack of table and seems to be addicted to cordial.  >:D :angel:

(Sorry buddy, couldn't help myself! )

Cheers
Evo
:cup:
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on March 22, 2014, 10:11:01 AM
(http://i784.photobucket.com/albums/yy128/4800GU/36bdffbc7e0336a91ca276319bbd6666.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on March 22, 2014, 10:46:31 AM
(http://i784.photobucket.com/albums/yy128/4800GU/76636d56c990e62d879760bf74e37d34.jpg)(http://i784.photobucket.com/albums/yy128/4800GU/049c7ddf15045220059973289cfeab90.jpg)(http://i784.photobucket.com/albums/yy128/4800GU/ca8e73b21f7dc1289cfa04b0fac78846.jpg)(http://i784.photobucket.com/albums/yy128/4800GU/02ca0726a841f2109b9dfddaafa2fac8.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: ozbogwam on March 22, 2014, 10:49:19 AM
What sort of cost for a fridge slide with pull out table and box enlosure
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: fuji on March 22, 2014, 07:29:37 PM
No, Drifta drawers are fine. Ignore the smarty pants comments.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: koolaz on March 24, 2014, 10:07:45 AM
Hey, looking good, do you do one for a JK wrangler 4 door?

Cheers matey
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on March 24, 2014, 03:02:26 PM
Hi Matey
I haven't done one for a wrangler ,if your local I could take a look
Or if you give me some measurements I can give you a quote on the drawer and supply enough fabric for you to do wings yourself.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: fuji on March 24, 2014, 05:59:12 PM
Andrew
I notice on the ebay site that you have tie down points. Can you tell me where you get those from?
Cheers
Wayne

Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on March 24, 2014, 07:46:22 PM
Pm sent
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: lochgilphead on April 07, 2014, 08:48:09 PM
G'day Andrew, having upgraded to a new Isuzu MU-X I will give you a call to come down and get some measurements for drawers and fridge slide. I am waiting on a cargo barrier to decide if the back row of seats come out or not.  I may have missed it but can you provide contact details?  Happy for an email if you don't want that public.  Thanks Ian
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: broncos11 on April 07, 2014, 09:04:25 PM
I got a set of drawers for my 100 series off Andrew and they're awesome.

Dave
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: urkel011 on April 21, 2014, 01:24:39 PM
(http://i784.photobucket.com/albums/yy128/4800GU/36bdffbc7e0336a91ca276319bbd6666.jpg)

Impressed with the look of these.
great looking set of drawers with a lot of functionality.
Whats the price for the above set for a 80 series
Cheers
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on April 21, 2014, 08:25:52 PM
Thanks mate ,
They do look great when fitted.
A set with the table for a 80 series would be $900
Without table and cavity would be $800
Both systems will bolt straight in with supplied bolts.
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: tizz007 on April 21, 2014, 09:52:37 PM
hi what kind of plywood do you use and thickness
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: DrewXT on April 30, 2014, 12:31:03 PM
is that table available through retail channels?  have been looking for something like that for a while...
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: BigJules on May 08, 2014, 01:38:49 PM
These are awesome, next truck I'm having a set.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on May 13, 2014, 09:15:15 PM
Web site now up visit www.affordable4x4drawers.com.au (http://www.affordable4x4drawers.com.au)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Brett B on May 13, 2014, 09:24:48 PM
Site looks as good as your storage units  :cup:
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: lochgilphead on May 21, 2014, 05:18:07 PM
Andrew finished up the drawer installation today.  First class job and I am absolutely stoked with the result.   The fridge will be an occasional fit so extra happy with the side by side drawers and the more useable layout.  Fridge slide is excellent and all fits neatly together with no wasted space.  Thanks Andrew.    :cup: :cup: :cheers: :cheers: ;D ;D

Would recommend his products unreservedly.  Mac
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: marvellous_matt on May 21, 2014, 06:49:04 PM
good job on the website, nice looking products.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 23, 2014, 06:25:04 PM
 :cheers:(http://i784.photobucket.com/albums/yy128/4800GU/55c81b7209a21d3a9c993f4a0a60d39c.jpg) :cheers:
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 23, 2014, 06:29:26 PM
 :cheers:(http://i784.photobucket.com/albums/yy128/4800GU/582f6d5c3c18fe903e83f99c9756c81f.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Swannie on June 23, 2014, 06:34:43 PM
Looks good mate.

Swannie
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 24, 2014, 07:36:13 PM
 :cheers:(http://i784.photobucket.com/albums/yy128/4800GU/be36aef84ca26eaa356d97f95d655612.jpg) custom fridge slide $250 if purchased alone
Or $220 if purchased with a drawer system.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 25, 2014, 06:48:50 PM
 :cheers:(http://i784.photobucket.com/albums/yy128/4800GU/DSCN1909.jpg)
Single drawers available
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 2010banditsa on June 25, 2014, 09:26:54 PM
Got any pics of any configurations in an NT pajero?
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 25, 2014, 10:30:10 PM
Yeah mate
I will put one up tommorow
Cheers Andrew
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: 4800gu on June 26, 2014, 08:15:41 AM
 :cheers:(http://i784.photobucket.com/albums/yy128/4800GU/80894e937ab699c6c524220e424b6ff8.jpg)(http://i784.photobucket.com/albums/yy128/4800GU/593ebfea07e5014d1ddd5b74d953cbaa.jpg)
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: TheWall on June 26, 2014, 09:20:20 PM
Gees I wish you were in Brisbane or the very least South East Qld!

Your work looks great and good value as well.

Coming up on holiday anytime soon?  :D

Matt
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: koolaz on June 26, 2014, 09:44:02 PM
Do you have anything to suit a JKU wrangler 4 door?
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: koolaz on July 06, 2014, 02:13:43 PM
Andrew, Just inboxed you....
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: koolaz on July 09, 2014, 10:04:19 PM
Have any blokes on Myswag bought these drawers since andrew started posting?
Swannie
Hi swannie,
Just got drawer system done by Andrew, really happy about it,  will recommend his work
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: jackman on July 14, 2014, 04:56:17 PM
Just got a single drawer from Andrew for my Challenger. Very happy with it and fits in perfectly.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Jenko67 on July 14, 2014, 07:15:19 PM
Got any pics of any configurations in an NT pajero?

Exactly what I was looking for. Any pics of an NT Pajero? A couple of drawers and fridge slide - freight to Brisbane. 4073 postcode.

Cheers
Scott
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: feisty on July 14, 2014, 11:36:01 PM
Just got a single drawer from Andrew for my Challenger. Very happy with it and fits in perfectly.
Any pictures?
Cheers
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: jackman on July 17, 2014, 04:15:10 PM
Any pictures?
Cheers
As I have a battery in the back this drawer was the perfect fit.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: feisty on July 17, 2014, 06:27:43 PM
Thanks mate
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: topcat on September 09, 2014, 12:32:32 PM
picked up this from Andrew - 1580 x 640 x 440 for the camper tub - excellent quality - will fit over the coming weeks and post a pic then .....
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Nick74 on October 27, 2014, 07:09:13 PM
Hey Andrew

I haver a 2013 PC Challenger and I was wondering if you could price up a single drawer next to a fridgeslide. Unlike the Challenger above my second battery is under the bonnet so if I could have the drawer and the fridgeslide the full length of the cargo area that would be best. I have a 70L fridgemate fridge which is quite long........ it just fits in the cargo area with about 30mm to spare

Also if possible a cage or partition around the fride so I can stack stuff on top of it

Cheers
Nick
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: cavlux on October 29, 2014, 09:50:33 PM
Hi Andrew. Judging by the positive comments so far and checking out your website I would be interested in getting a set of drawers. Have you made any drawers for a Hilux? (2012 model) as I haven't seen this mentioned anywhere. I have a canopy and would be looking at double lowline drawers with wings and fridgeslide. The only thing I wonder is that I have an 80l Engel and would that slide under the canopy, and even if it does would I be better off with a drop down slide? If it doesn't fit I would go a single drawer and access the fridge through the gull wing window as I do now (a bit of a pain though) or even a slide at floor level. I'm in Perth but happy to pay freight and fit myself. Let me know if you need dimensions etc and I will send a PM.
Cheers
Shane

Sent from my HTC One XL using Tapatalk

Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Stylemaster70 on October 30, 2014, 02:54:37 PM
I have had Andrews draws for a couple of years and they are still going strong. I highly recommend them.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: lindamc on March 14, 2015, 07:17:04 AM
We have now got Andrews drawers installed. Very very happy with them, thank you Andrew

(http://i815.photobucket.com/albums/zz76/kristinmcdonaldz/2015-03-08%2016.39.41_zpsqizt32qo.jpg)

They look very similar to TopCats I think.
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: topcat on March 15, 2015, 01:25:00 PM
Congrats Linda - we've had ours for over 6 months and the quality is excellent - makes a great difference to the camping.
Andrew makes good gear - worth checking out for anyone looking for drawers in Melb.
Enjoy!
TC
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Proudy on March 15, 2015, 01:50:12 PM
Hi Andrew, have you fitted any draws into a landcruiser 76. What price would I be looking at and freight to Nords Wharf NSW 2281.
Cheers


Sent from my iPad using Tapatalk
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: lindamc on March 15, 2015, 02:37:58 PM
Thanks topcat the drawers were put to use this weekend!
Proudy Andrew may not get your question for awhile he is away now .


Sent from my iPhone using Tapatalk
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Proudy on March 15, 2015, 02:40:07 PM
That's no prob still working out a few things thanks


Sent from my iPad using Tapatalk
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: Jasjul on March 23, 2015, 03:13:13 PM
Hi Mate,

How do you attach draws in a ute?  I'm looking for a single draw in a tub.

Jason
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: hempo on March 30, 2015, 11:56:21 AM
Topcat can you please put up some more photos?  Or is there a link to your camper build?

I really like the way they slide out of the camper firstly as a whole unit then the drawers also open up.  We have a kitchen on the door also and therefore drawers need to be in deep enough and I am looking for ways to ensure full access to the drawers.  Your setup looks perfect.

Cheers
Title: Re: Affordable 4x4 drawers (Melbourne )
Post by: topcat on April 02, 2015, 11:23:32 AM
Topcat can you please put up some more photos?  Or is there a link to your camper build?

I really like the way they slide out of the camper firstly as a whole unit then the drawers also open up.  We have a kitchen on the door also and therefore drawers need to be in deep enough and I am looking for ways to ensure full access to the drawers.  Your setup looks perfect.

Cheers

Sorry, I missed your post - I will post up some more or can email them to you if you pm your email addy.
I'm hoping to go camping this weekend (depending on work at the moment) and will take some more then.
Cheers
Tony