« previous next »
Pages: [1]   Go Down

Author Topic: best welder under $500  (Read 6541 times)

0 Members and 1 Guest are viewing this topic.

Offline prado2004

  • Soft Floor Camper User
  • ****
  • Posts: 658
  • Thanked: 41 times
  • Gender: Male
best welder under $500
« on: January 28, 2015, 08:12:50 PM »
hey guys, need a welder and preferably would like it under $500 simply because its only for the odd job and don't need anything crazy.

Have found these two, what do you think of them and would you buy them? I am going for a mig for ease of use as I do not have a massive amount of experience.

Unimig 180
http://www.totaltools.com.au/unimig-welder-mig-gasless-180a-kmm180_1024511/#.VMi1ZMbR3dk

Tradetools 180 mig
https://www.tradetools.com/product-range/welding-equipment/welding-machines/tradetools-180a-mig-welder-gas-gas-gasless-with-regulator

Any other options are appreciated, I figure these two are a lot better quality then something like this

http://www.supercheapauto.com.au/online-store/products/CIGWELD-Welding-Mig-Welder-135-Amp.aspx?pid=346523#Recommendations

Thanks!
Logged
2012 4dr JK wrangler, 3.5" AEV lift, AEV mags, 35" muddies, front/rear arb bars, tjm sliders, pioneer platform and some other goodies
http://www.myswag.org/index.php?topic=47825.0

Custom Camper with solar, gas hot water & fully self sufficient 
http://www.myswag.org/index.php?topic=35159.0

Offline Big Tread

  • Tent User
  • ***
  • Posts: 191
Re: best welder under $500
« Reply #1 on: January 28, 2015, 08:31:42 PM »
I've got the Unimig 180 unit. It's ok, but the unit is very heavy so I tend not to get it out very often. It also has a 15 amp plug,  which restricts where you can use it.
I wish I'd got an inverter arc welder for the small jobs I do.
Logged
-----------------------------------------
2007 VX Prado
Tambo Omeo

Offline dales133

  • Hard Top Camper User
  • ******
  • Posts: 2199
  • Thanked: 119 times
Re: best welder under $500
« Reply #2 on: January 28, 2015, 08:35:12 PM »
I got one off ebay. The sellers got a shop in balleratt wit spare parts,250 amp inverter mig with remote wire feed.
He sells them for 2500.00 buy now but does several no reserves a month.
Awsum welder even for twice what I paid
Logged

Offline Bobsan

  • Tent User
  • ***
  • Posts: 123
  • Thanked: 4 times
Re: best welder under $500
« Reply #3 on: January 28, 2015, 08:36:43 PM »
I purchased a Unimig 180, it is OK , I paid 420 bucks 2 years ago. I wanted something that I could get serviced locally if required.
Logged
Mits Challenger.
Bushranger Rear fold  Camper

Offline Bill

  • Hard Top Camper User
  • ******
  • Posts: 2747
  • Thanked: 89 times
  • Gender: Male
Re: best welder under $500
« Reply #4 on: January 28, 2015, 09:01:12 PM »
I have the Super Cheap 140 Mig gas/gasless from Super Cheap ( no surprise there)
Run it on gas and gasless.
Works great
Bil
Logged
"The problem with the world is stupidity. I'm not saying there should be capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?"
-unknown

Offline prado2004

  • Soft Floor Camper User
  • ****
  • Posts: 658
  • Thanked: 41 times
  • Gender: Male
Re: best welder under $500
« Reply #5 on: January 28, 2015, 09:25:36 PM »
Quote from: Big Tread on January 28, 2015, 08:31:42 PM
I've got the Unimig 180 unit. It's ok, but the unit is very heavy so I tend not to get it out very often. It also has a 15 amp plug,  which restricts where you can use it.
I wish I'd got an inverter arc welder for the small jobs I do.

Yes I plan on making a trolley up to sit the unit on as the weight. I just figure 180 would be good for small jobs and also the bigger ones. I figure the 15 amp plug can be altered to a 10 amp as this seems to be what lots of people do
Logged
2012 4dr JK wrangler, 3.5" AEV lift, AEV mags, 35" muddies, front/rear arb bars, tjm sliders, pioneer platform and some other goodies
http://www.myswag.org/index.php?topic=47825.0

Custom Camper with solar, gas hot water & fully self sufficient 
http://www.myswag.org/index.php?topic=35159.0

Offline Ynot

  • Hard Floor Camper User
  • *****
  • Posts: 888
  • Thanked: 1 times
  • Gender: Male
  • Tony. Prado 150 GXL, Coromal 632RTP
Re: best welder under $500
« Reply #6 on: January 28, 2015, 09:40:17 PM »
I like the inverter stick welders, no worries about wire rusting etc and the new models are very easy to use with the smart starting some now have. Also if you buy a reg most can covert to a tig unit.
There is not much field work that doesn't get done with these units at work.
I bought a uni mig brand stick and it goes all right.


Sent from my iPad using Tapatalk HD
Logged
How is education supposed to make me feel smarter? Besides, every time I learn something new, it pushes some old stuff out of my brain. Remember when I took that home winemaking course, and I forgot how to drive?  (Homer J Simpson).

Offline bazt

  • Tent User
  • ***
  • Posts: 112
  • Thanked: 9 times
  • Gender: Male
  • Don’t believe everything you think
Re: best welder under $500
« Reply #7 on: January 28, 2015, 10:28:32 PM »
I have had the Tradetools 180 mig for a few years now.
Not used a lot but always works when I need it.
Run it gasless with fluxed wire.
baz
Logged
2013 Navara ST-X Blackline V6
MDC XT17 HRT
2011 VW Golf R

Offline RebsWA

  • Hard Floor Camper User
  • *****
  • Posts: 1017
  • Thanked: 56 times
  • Gender: Male
Re: best welder under $500
« Reply #8 on: January 28, 2015, 11:10:22 PM »
I bought myself for xmas a CIG Weldskill 135 Mig Welder from Masters for $374 and it came with a beaut CIG auto darkening helmet.
The toolshops around here wanted $799 for them without the helmet, so I went looking at cheapies till Google turned up that one on special at Masters (in Perth).
Whole thing works a treat and can run gas if required.
Im a happy camper.
Logged
You don't stop laughing because you grow old
You grow old because you stop laughing

2006 TD LandCruiser Troopy LX  -  2015 Jayco Starcraft Outback (a Caravan...)

Offline duggie

  • Hard Top Camper User
  • ******
  • Posts: 2447
  • Thanked: 172 times
  • Gender: Male
  • Dont you just love it.
Re: best welder under $500
« Reply #9 on: January 29, 2015, 08:49:12 AM »
IMHO, out of the two listed , the Unimig 180 would be my choice.

Quote from: prado2004 on January 28, 2015, 09:25:36 PM
Yes I plan on making a trolley up to sit the unit on as the weight. I just figure 180 would be good for small jobs and also the bigger ones. I figure the 15 amp plug can be altered to a 10 amp as this seems to be what lots of people do
 

I would advise you to get a sparkey around and wire in a 15 amp circuit , a lot less of a problem with tripping fuse boxes if you can feed the unit with the correct amps.

cheers duggie
Logged
" Old Nissans Just Keep On Truckin On "

Offline prado2004

  • Soft Floor Camper User
  • ****
  • Posts: 658
  • Thanked: 41 times
  • Gender: Male
Re: best welder under $500
« Reply #10 on: January 29, 2015, 08:53:20 AM »
Quote from: duggie on January 29, 2015, 08:49:12 AM
IMHO, out of the two listed , the Unimig 180 would be my choice.
 

I would advise you to get a sparkey around and wire in a 15 amp circuit , a lot less of a problem with tripping fuse boxes if you can feed the unit with the correct amps.

cheers duggie


Cheers Duggie, was thinking of buying one of these would be cheaper then a sparky and mobile if I take the welder somewhere. don't want to void warranty by cutting it either.

http://www.ebay.com.au/itm/10A-to-15A-Converter-Adapter-RCD-for-Caravan-RV-Motorhome-10-Amp-to-15-Amp-/321540351206?pt=Caravan_Parts_Accessories&hash=item4add4c64e6
Logged
2012 4dr JK wrangler, 3.5" AEV lift, AEV mags, 35" muddies, front/rear arb bars, tjm sliders, pioneer platform and some other goodies
http://www.myswag.org/index.php?topic=47825.0

Custom Camper with solar, gas hot water & fully self sufficient 
http://www.myswag.org/index.php?topic=35159.0

Offline D4D

  • Hard Top Camper User
  • ******
  • Posts: 16015
  • Thanked: 390 times
  • Are we there yet?
Re: best welder under $500
« Reply #11 on: January 29, 2015, 08:56:15 AM »
I bought one of these from these from the green shed, although I paid $70. Haven't use it yet though.

Logged
I owe, I owe, it’s off to work I go…

Work - Outback
Play - Prado

Offline eman

  • Sleeping Bag User
  • *
  • Posts: 44
  • Thanked: 1 times
  • Gender: Male
Re: best welder under $500
« Reply #12 on: January 29, 2015, 09:17:17 AM »
Another unimig kmm180 user here... agree on the weight, mine now lives on a trolley. Had a 15A plug installed but the lead is pretty short

Have used it recently making up a set of sliders, has done it easily. First time using a gasless mig but seems to be ok. Will switch over to gas eventually though and get a spool gun for aluminum
Logged

Offline dales133

  • Hard Top Camper User
  • ******
  • Posts: 2199
  • Thanked: 119 times
Re: best welder under $500
« Reply #13 on: February 08, 2015, 06:49:16 PM »
I've just ground the earth pin down on a 10m lead and plug mine into a regular outdoor power point.
The beauty of the remote wire feed is its also the same connection for a spool gun
Here you go... anyone looking for a good welder for the right money.
Mines very simmilar to this I'd have to check the seller.
http://m.ebay.com.au/itm/131112726076
« Last Edit: February 08, 2015, 06:54:22 PM by dales133 »
Logged
Pages: [1]   Go Up
« previous next »