Author Topic: What did you do in your shed / man cave today? (Read 1750476 times)

First gate project is virtually finished, with just the ground cover to be finalised.

Second gate project started. Ran into footings on the ‘house side’, so drilled the footing and welded some brackets to the post, then bolted the post down prior to concrete. I will also use brackets further up the post, attaching it to the house. Started the fence side and ran into a fence post footing. No way around it, that I could think of, but to have the ‘fence side’ gate post about 150mm out of square to the house side gate post. This offset shouldn’t be noticeable😓.

DannyG · « **Reply #6433 on:** August 23, 2021, 01:35:11 PM »

Big weekend in my shed.....

I have a little project where I need to spend a week or so at around 4 mtrs or so high. So I build myself a platform. It all comes apart for easy transport......probably highly illegal though

I started restoring my old Atlas 7B Shaper

And I bought a really old weathered picnic table that was built out of Blackwood so I gave that a sand and varnish. I stick it on a block we go camping at.

bmwfreak · « **Reply #6434 on:** August 26, 2021, 03:27:40 PM »

Finished the gates. Just a bit of landscaping to cover up the pooch barrier that is on the yard side of the gates.

Raym · « **Reply #6435 on:** August 27, 2021, 04:45:02 PM »

Quote from: Raym on July 21, 2021, 05:29:38 PM

Wish I could post about my current project but it is "secret squirrel business". I am sure there are folk on here that could provide good input (that I need) but I have been asked to keep mum.
At this stage reveal is mid September.

Well can finally reveal. This is a full scale wedge tailed eagle made from 1.2 mild steel sheet for the head & feathers. The skeleton is made up of round mild steel, and the talons are forged from reo bar. Wing span is approx 1.8 metres.

It will be mounted inside a building at a veterans retreat near Charleville, however building has been delayed as the mill for the structural timber decided to fall to bits.

Was meant to stay under wraps until the building was ready but it was taking up to much room here at home.

Just delivered it out there & had a week camping at the retreat.

Not sure I am keen to do another, took about 4 weeks

plusnq · « **Reply #6436 on:** August 27, 2021, 05:03:33 PM »

Nice work Raym !

Pottsy · « **Reply #6437 on:** August 27, 2021, 05:05:37 PM »

Another superb effort Raym, fantastic

jwb · « **Reply #6438 on:** August 27, 2021, 06:11:09 PM »

WOW!
Great work!

Sent from my SM-G973F using Tapatalk

Robbo · « **Reply #6439 on:** August 27, 2021, 10:46:51 PM »

Wow! That is Magnificient. Well done.

Sent from my SM-J600G using Tapatalk

Spada · « **Reply #6440 on:** August 28, 2021, 06:23:34 AM »

That is just spectacular 👍

Fizzie · « **Reply #6441 on:** August 28, 2021, 08:06:20 AM »

Wow!

What's it weigh all up

Raym · « **Reply #6442 on:** August 28, 2021, 08:51:47 AM »

Thanks for the kind comments.

Would weigh around 20kgs. I could manage to pick it up myself just awkward.

Should have put it in Outback Sculptures. Pulled up in Roma to have a look at the display.

They had huge prices on them & most had sold. There was a brolga made from stainless & it sold for 4,500 I think or may have been 3k can't remember. Either amount was staggering to me.

Fizzie · « **Reply #6443 on:** August 30, 2021, 12:27:42 PM »

Modified the original In-Sink Cutting Board Mark I into the Mark II by making the hole bigger, as requested!

Also really lashed out by giving it a coat of stain to (hopefully) make it a little more water resistant

sparksy · « **Reply #6444 on:** August 31, 2021, 10:39:25 AM »

Sort of in shed, just outside it.
Wandering around Bunnings on weekend ( apologies to those in lockdown) and on their clearance trolley for $2 ea were garden wall pots. maybe went overboard but bought the lot, 24 of them.
We originally had a smaller version which was full of strawberry plants and they went well.
Couple of those decorative cutout panels, 3 lengths of solar panel framing and a couple of square post, all courtesy of verge pickup over the years and its up.
Now have to do a look around for 75 plants to fill it.

#jonesy · « **Reply #6445 on:** August 31, 2021, 04:44:30 PM »

Nice pick up. Probably don't need the decorative panels behind as the plants will quickly cover them.

sparksy · « **Reply #6446 on:** August 31, 2021, 07:40:57 PM »

Quote from: #jonesy on August 31, 2021, 04:44:30 PM

Nice pick up. Probably don't need the decorative panels behind as the plants will quickly cover them.

Was a excuse to stop tripping over them from back of shed.

corndog · « **Reply #6447 on:** September 02, 2021, 06:23:03 PM »

Seeing I struggled with trying to get the lawn mower to start I got a click and collect air filter and installed it. One pull and off to cut the grass.

Jeepers Creepers · « **Reply #6448 on:** September 03, 2021, 04:24:42 AM »

Quote from: Fizzie on August 30, 2021, 12:27:42 PM

Modified the original In-Sink Cutting Board Mark I into the Mark II by making the hole bigger, as requested!

Also really lashed out by giving it a coat of stain to (hopefully) make it a little more water resistant

Could double as a lid for a porta Shitter too....

Oh, you'll wanna wash it first, no one want potato and carrot peelings getting stuck to their arse.

Steffo1 · « **Reply #6449 on:** September 03, 2021, 07:50:07 AM »

Quote from: corndog on September 02, 2021, 06:23:03 PM

One pull and off to cut the grass.

Fair enough, but did the new air cleaner work?

News:

Author Topic: What did you do in your shed / man cave today? (Read 1750476 times)