MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: Foo on August 09, 2021, 04:12:33 AM
-
I'm looking at getting into these and I'm suffering from info overload and my poor brain is full and ready to explode. :o Anyone on here with experience in them and using them at all. ??? I'm not looking at gazillion dollar ones but the Creality Ender range. I'm wanting to make my own parts for different areas of treadlies that have shown up weaknesses and also other areas away from bikes. ???
Foo
-
I'm looking at getting into these and I'm suffering from info overload and my poor brain is full and ready to explode. :o Anyone on here with experience in them and using them at all. ??? I'm not looking at gazillion dollar ones but the Creality Ender range. I'm wanting to make my own parts for different areas of treadlies that have shown up weaknesses and also other areas away from bikes. ???
Foo
I may have 1 or 4 of them. Creality ones will be needing mods to get the best out of them. Buy cheap pay twice. Filament drying is now becoming a standard before using them. Expect a lot of rejected parts.
Sent from .............. Somewhere in Australia
-
I may have 1 or 4 of them. Creality ones will be needing mods to get the best out of them. Buy cheap pay twice. Filament drying is now becoming a standard before using them. Expect a lot of rejected parts.
Sent from .............. Somewhere in Australia
Well don't keep it a secret, what ones do you have, that's why I'm asking about them? ???
Foo
-
Well don't keep it a secret, what ones do you have, that's why I'm asking about them? ???
Foo
All custom builds. 2 bed slingers, 2 coreXY
Sent from .............. Somewhere in Australia
-
All custom builds. 2 bed slingers, 2 coreXY
Sent from .............. Somewhere in Australia
Hey Scott, I wouldn't mind having a look when we're allowed out to play....
:cheers:
-
Hey Scott, I wouldn't mind having a look when we're allowed out to play....
:cheers:
Anytime champ. Will probably have to be in the new year. I've gotta somehow get to WA for a big project.
Sent from .............. Somewhere in Australia
-
Bit the bullet and ordered an Ender Cr-10s Pro. ;D
Foo
-
How’s the new printer going? If ya got any questions give us a call. Available this week
-
How’s the new printer going? If ya got any questions give us a call. Available this week
I guess your WA travel plans arent going well?
-
I guess your WA travel plans arent going well?
That part is good now. Waiting on SA. Then have a long drive
-
Then have a long drive
Sounds like fun :)
-
How’s the new printer going? If ya got any questions give us a call. Available this week
Waiting on delivery. Thanks. :)
Foo
-
I guess your WA travel plans arent going well?
Got the SA pass. Good to go.
After 2 months of being unable to work or get any government funding, ever, (didn’t meet their criteria), I’m looking forward to doing some actual work.
So going to the local butchers for some king rib eye steaks, local IGA for milk, hitch up the trailer, 270ltrs diesel already on board, I’m breaking out……………. Legally ;D
-
Oh oh oh it turned up at 2.30 yesterday. ;D
Foo
-
Woo hoo
Sent from .............. Somewhere in Australia
-
Well it's working but I'm glad that I'm not hanging by my short n curlies! :laugh: :laugh: ;D
https://www.youtube.com/watch?v=BtK3E3xoWug (https://www.youtube.com/watch?v=BtK3E3xoWug)
Foo
-
6hrs 10mins later. :o :o For a first off print, I think it's not to bad but I'm going to bed now! ;D
(https://uploads.tapatalk-cdn.com/20210817/57d7f2b34dcfb7e3d98d44edf1051572.jpg)(https://uploads.tapatalk-cdn.com/20210817/78a13419ea9611232eacce616e617018.jpg)(https://uploads.tapatalk-cdn.com/20210817/37ea5e4d76614e97b7b709b303c13833.jpg)(https://uploads.tapatalk-cdn.com/20210817/14371c632d93494415e6d53db7d8723b.jpg)
Foo
Sent from my CPH1879 using Tapatalk
-
Lookin the goods.
Sent from .............. Somewhere in Australia
-
Thanks, gotta say I'm pretty happy with that for a first try. :) Now to learn how to use it and design and import things will be a big ask of my little brain. ;D
Foo
-
Nice, Foo :cup:
How big is the pig ???
-
Nice, Foo :cup:
How big is the pig ???
45x60x65mm.
Foo
-
So not quite as big as a packet a ciggies. (Well maybe wider)
Sent from me
-
So not quite as big as a packet a ciggies. (Well maybe wider)
Sent from me
Yeah, about that.
Foo
-
45x60x65mm.
For 6 hours work!
You're definitely not going to be building yourself a new car! ::) ;D >:D
-
For 6 hours work!
You're definitely not going to be building yourself a new car! ::) ;D >:D
That was all to do with settings. :P ::)
Foo
-
well are you making car parts yet? :)
-
well are you making car parts yet? :)
No, I'm still trying to figure it out.
Foo
Sent from my SM-T510 using Tapatalk
-
Do you need 3D glasses to read the manual? ;D
-
No only to see the finished product
Sent from me
-
Sooo 12 months on Fooman, hows the printing going ??
-
Sooo 12 months on Fooman, hows the printing going ??
Umm, it's not. :( It's on the back burner till I can get a lot of other things sorted out. I need lots of time for learning how to use tech stuff and that is a problem for me. :'(
Foo
-
I have an ender3 V2 humming away, a good starting point. My son Declan is good at it and so far I am having fun
GG
-
I have an ender3 V2 humming away, a good starting point. My son Declan is good at it and so far I am having fun
GG
I also bought an Ender3 late last year, good little unit.
-
Umm, it's not. :( It's on the back burner till I can get a lot of other things sorted out. I need lots of time for learning how to use tech stuff and that is a problem for me. :'(
Foo
If ya need help sing out
-
If ya need help sing out
Thanks for that offer, it's greatly appreciated. 8) :cheers:
Foo