MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: GBC on December 01, 2017, 01:43:34 PM

Title: Transport compliance - Inskip Pint
Post by: GBC on December 01, 2017, 01:43:34 PM
I have just seen on another site the police and Dept of Transport have a checking station and mobile weighbridge set up again at Inskip Point checking all traffic heading to the island. No doubt they will have a few customers.
Title: Re: Transport compliance - Inskip Pint
Post by: weeds on December 01, 2017, 01:46:52 PM
Is it an education exercise??

If not what do they do if your overweight??


Sent from my iPhone using Tapatalk Pro
Title: Re: Transport compliance - Inskip Pint
Post by: weeds on December 01, 2017, 01:52:00 PM
I assume this is them set up
(https://uploads.tapatalk-cdn.com/20171201/94e9de307b8ee0cd4dc30d04ec07381c.jpg)


Sent from my iPhone using Tapatalk Pro
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 01, 2017, 02:01:41 PM
Is it an education exercise??

If not what do they do if your overweight??
give you a nice fine and the number of a tow truck company
Title: Re: Transport compliance - Inskip Pint
Post by: weeds on December 01, 2017, 02:11:13 PM
give you a nice fine and the number of a tow truck company

Start of school holiday.......every second 4WD will probably be over. I think they will need a couple of B Double Car Carriers


Sent from my iPhone using Tapatalk Pro
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 01, 2017, 02:22:34 PM
Quote from: weeds
Start of school holiday.......every second 4WD will probably be over. I think they will need a couple of B Double Car Carriers
watchin the cop/rbt shows on tele they have had a few over limits who haven't been allowed to move until they remove some weight...
Title: Re: Transport compliance - Inskip Pint
Post by: Charlie Brown on December 01, 2017, 06:53:41 PM
Excellent.  Transport will be checking weights and defects I presume.  Cops will be doing licences and RBT.  Might stop some of the dicks who are too stupid to do the right thing.
Title: Re: Transport compliance - Inskip Pint
Post by: Bigfish on December 01, 2017, 08:44:16 PM
Excellent.  Transport will be checking weights and defects I presume.  Cops will be doing licences and RBT.  Might stop some of the dicks who are too stupid to do the right thing.

Yep, many of the wankers will know they are overweight but they dont care.  Hopefully a decent fine and transport cost might wake the tools up..
Title: Transport compliance - Inskip Pint
Post by: weeds on December 01, 2017, 09:36:46 PM
Yep, many of the wankers will know they are overweight but they dont care.  Hopefully a decent fine and transport cost might wake the tools up..

I think you’ll fine everyday mums and dads will be over and either don’t realize or don’t want to know.......

bugger all people put their rig over a weigh bridge.

The last big family trip (couple of years ago) I did in hi-lux we were overweight on GVM and rear axle. Three teenage kids, camper, touring for a couple of weeks. 300kg over without really trying. Suppose I could have returned home and offloaded some weight....


Sent from my iPhone using Tapatalk Pro
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 01, 2017, 09:48:27 PM
I think you’ll fine everyday mums and dads will be over and either don’t realize or were told total bullShit by the camper trailer manufacturer
fixed
Title: Re: Transport compliance - Inskip Pint
Post by: rags on December 01, 2017, 09:49:43 PM
Three teenage kids, camper, touring for a couple of weeks. 300kg over without really trying. Suppose I could have returned home and offloaded some weight....


Sent from my iPhone using Tapatalk Pro

Problem is that if you went home and unloaded some weight, you will end up in trouble again as I'm sure leaving 3 kids alone while you went on holiday is an offence😃
Title: Re: Transport compliance - Inskip Pint
Post by: bdrjnr on December 02, 2017, 05:39:34 AM
This is interesting to see...
I was getting a e check (pink slip) in NSW this week. And i always ask what are the latest bulletins from rms? Or what are they trying to push through.

The guy mentioned one thing that kind of goes along with this.  Now this was for nsw. And this doesnt seem right.. so i may have misunderstood. Or he may have miss understood.

They are starting to crack down on total weights. So my licence has 4.5 tonne gvm. In short how he described it was that if i had a 3 tonne 4wd and a 2 tonne caravan i will have a total of 5 tonne therefore according to licene it will be illeagal.

I understand all the thousands and thousands that will be affected.....

He mentioned there will be a special online test for people to upgrade licence.  So not a truck licwnce as such but a "towing licence" he dodnt know the weigbts but for example a total weight of 6 tonne.

I spoke  to a couple of other ppl i know and they said that couldnt be right.

Not sure if any of you have heard anything like this.. or if i have misunderstood..  please let me know.
Title: Re: Transport compliance - Inskip Pint
Post by: GBC on December 02, 2017, 05:52:01 AM
I think you’ve misheard him. In qld the magic number is 4495 kg for gvm before a rego and license upgrade is required. That doesn’t include your 3500 kg plus trailer. I wouldn’t be surprised if a few imported and modified rigs get up there but it wouldn’t be common for most of us. We have a derated canter at work towing a full size bobcat which flaunts the grey areas. If towing the trailer it needs to have the tipper empty. It is on car rego and only needs a car license. Personally I think you should have extra training to use a rig like that on the road, it can be a handful and the truck handles and tows better with a tonne in the tray which makes it illegal. We drag the bobcat around with the ranger which does it much easier than the truck but I have no doubt would be mermaid bait.
Title: Re: Transport compliance - Inskip Pint
Post by: bdrjnr on December 02, 2017, 06:01:17 AM
I think you’ve misheard him. In qld the magic number is 4495 kg for gvm before a rego and license upgrade is required. That doesn’t include your 3500 kg plus trailer. I wouldn’t be surprised if a few imported and modified rigs get up there but it wouldn’t be common for most of us.
Thanks GBC. I asked him 3 times to makes sure.. and he was pretty confident. 

But i probably misheard him.. trying to make sure he passed my motorbike.

Ha ha

Sent from my SM-G950F using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: callmejoe on December 02, 2017, 02:17:56 PM
He's very wrong.
A car lic is a weight no greater then 4.49t.(corrected i push t wrong digit)
You can tow 3.5 on a standard lic... but there are a few exception, the max on paper is a combo of 9t yes 9t.
Example A f250 rated at 4.5t and  RATED to tow 4.5 (most likely a 5th wheeler setup) total of 9t. All on a standard lic... Tassie did change that law to something more realistic.
Alot of the standards for towing are actually set by yr vehiclee limitations. Reason bring 3.5t seems to be the "standard" max.
Title: Re: Transport compliance - Inskip Pint
Post by: #jonesy on December 02, 2017, 05:44:32 PM
Car licence is not exceeding 4.5t. GVM
So you can drive at 4.5.although a lot of people mistakenly believe that it has to be under   Also why quite a few hire truck are 4495kg

And it been a while since I read the regs for Vic relating to licences, but I think you are allowed to tow a full 9t trailer! And not a max GCM of 9t. Not that I can think of a vehicle combination that would be that big.
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 02, 2017, 06:27:25 PM
Car licence is not exceeding 4.5t. GVM
So you can drive at 4.5.although a lot of people mistakenly believe that it has to be under   Also why quite a few hire truck are 4495kg

And it been a while since I read the regs for Vic relating to licences, but I think you are allowed to tow a full 9t trailer! And not a max GCM of 9t. Not that I can think of a vehicle combination that would be that big.
As per a few hire trucks, I drive a small pantech with a 4.4t  TARE weight, and although I have a MR license, it can be driven with a normal license, BUT,  if I had a normal license, I could only carry 100kgs !!!
But there are a lot doing it because they are confused about tare and GVM. Same as restricted roads for trucks.......some say 3T, some say 5T tare and some say 5T GVM and others just show a truck with a slash thru it.....
Title: Re: Transport compliance - Inskip Pint
Post by: GBC on December 03, 2017, 06:02:26 AM
Not in Qld. Car license is limited to 4.5 gvm. Tare has nothing to do with it. Hence why we derated the truck. Same with 6wd conversions on land cruisers, once they go past 4495 kg gvm you need a LR licence to drive one regardless of what is on the back.
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 03, 2017, 06:20:43 AM
Not in Qld. Car license is limited to 4.5 gvm. Tare has nothing to do with it. Hence why we derated the truck. Same with 6wd conversions on land cruisers, once they go past 4495 kg gvm you need a LR licence to drive one regardless of what is on the back.

Yeh, that's what I said, a lot are saying because the tare is under 4.5t, you only need a car license, but an extra ?? amount puts you over the 4.5t and makes it illegal.
But even if the tare is say 3.5t, it may be hard to know exactly what your load weighs, and your load is going to change all the time (talking a work truck ), so a lot of small trucks could be over the 4.5t GVM without the driver realising.
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 03, 2017, 06:32:11 AM
I thought it was based on the truck gvm. If it registered as 4495t then a car license is ok. If you have a truck license it still doesn't allow you to carry more.
Title: Re: Transport compliance - Inskip Pint
Post by: callmejoe on December 03, 2017, 07:36:16 AM
I thought it was based on the truck gvm. If it registered as 4495t then a car license is ok. If you have a truck license it still doesn't allow you to carry more.

You are correct.
People are mixing Gross weight with the Tare weight.
On average a truck with a GVM (Gross) would only have a TARE  weight 2.5t to 3.t. This gives you anything from 2t to 1.5t payload...
Title: Re: Transport compliance - Inskip Pint
Post by: Rumpig on December 03, 2017, 08:22:39 AM
Were they doing RBT's at Inskip Pint? :cheers: ;D
Title: Re: Transport compliance - Inskip Pint
Post by: nab on December 03, 2017, 01:59:35 PM
What about trailers?

If a small sedan was towing an empty tandem car trailer rated to 2T (tare weight 600kg) but small car tow rating was 1T, can the small car tow the empty trailer? Or does the tow car need to be able to legally tow 2T?
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 03, 2017, 02:33:16 PM
Ah. Towing capacities.  Need to sit for this
If a cars tow limit is 1 t then it can tow 1 t as long as it doesn't exceed its gcm. It can't tow 2t under any circumstances
The car doesn't need to be rated for 2t to tow a trailer that weighs 1t
Title: Re: Transport compliance - Inskip Pint
Post by: GBC on December 03, 2017, 03:42:37 PM
Agree. Yes the little car can tow the big empty trailer. I have a mate who tows an mdc xt12 with a hilux who pays close attention to how much he loads it. He is 1650 tow rated on the lux and the xt12 is under that - lightly loaded - but towed by a different vehicle it can go to 3000 kg GTM.
Title: Re: Transport compliance - Inskip Pint
Post by: #jonesy on December 04, 2017, 05:24:32 AM
I thought it was based on the truck gvm. If it registered as 4495t then a car license is ok. If you have a truck license it still doesn't allow you to carry more.

As said already it is on GVM a max of 4.5t. Which is the maximum it is allowed to weigh, and not what it weighs at the time. So an empty truck weighing 4.4t CANNOT be driven on a car licence if it's GVM is 6t


Trailer limits is a whole other story and relates to the actual weight of the trailer
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 04, 2017, 12:48:47 PM
Ahhh. Good old GVM talk. Nearly as good as rated recovery point discussions.
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 04, 2017, 06:29:07 PM
So an empty truck weighing 4.4t CANNOT be driven on a car licence if it's GVM is 6t




You're right, BUT, if a truck has a plate with 4.4T GVM, ( just like the truck I drive ) how do you know it's under 4.4T when fully loaded ? Without knowing the tare, how do you keep under the GVM ?
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 04, 2017, 07:15:23 PM
The tare is on the plate too. Subtract that from the gvm. Thats your payload max
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 04, 2017, 07:22:46 PM
The tare is on the plate too. Subtract that from the gvm. Thats your payload max

Had a look today, couldn't see a tare on the plate ! I'll have another look tomorrow !
Looking a few sites, and truck tare seems to be bare chassis, so to arrive at GVM, you add the body ( be it pantech, tray, tipper etc ) plus the load ( including passengers of course ), so not as easy as it seems ?
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 04, 2017, 08:19:21 PM
It used to be on the rego sticker but soms of us dont get them anymore.  Will definitely be on the rego papers as it would've had to of had a weigh bridge ticket  when presented for inspection
Title: Re: Transport compliance - Inskip Pint
Post by: Paddler Ed on December 04, 2017, 08:32:38 PM
Had a look today, couldn't see a tare on the plate ! I'll have another look tomorrow !
Looking a few sites, and truck tare seems to be bare chassis, so to arrive at GVM, you add the body ( be it pantech, tray, tipper etc ) plus the load ( including passengers of course ), so not as easy as it seems ?

If it's NSW rego, put the rego into the NSW Rego checker (https://my.service.nsw.gov.au/MyServiceNSW/index#/rms/freeRegoCheck/details) and you'll get the Tare weight and the GVM - for my Land Cruiser it's recorded as 1960kg and 3040kg respectively, whilst my 4Runner is 1,720 kg and 2,520 kg... however, I think it's nearer 2000kg unladen, but that does include me (100kg) and some metal work and slightly bigger wheels and tyres (31x10.5R15 vs 205R16).
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 04, 2017, 08:38:09 PM
It used to be on the rego sticker but soms of us dont get them anymore.  Will definitely be on the rego papers as it would've had to of had a weigh bridge ticket  when presented for inspection

Ha, might be a bit suss asking the boss for a look at the rego papers !!

Small trucks under 4.5T GVM  don't need a weigh bridge ticket for rego.
Title: Re: Transport compliance - Inskip Pint
Post by: Paddler Ed on December 04, 2017, 09:43:21 PM
Ha, might be a bit suss asking the boss for a look at the rego papers !!

Small trucks under 4.5T GVM  don't need a weigh bridge ticket for rego.

They do for first registrations or blue slip though... just like a tray back ute does.
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 05, 2017, 05:58:40 AM
If you are driving a truck for a living then it's your responsibility to know the weights.  If you are overloaded you  will get the fine. Go to a weigh bridge and find out
Title: Re: Transport compliance - Inskip Pint
Post by: r0bl on December 05, 2017, 06:41:28 AM
I guess these will start to become a essential accessory ..

http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html (http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html)
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 05, 2017, 08:11:02 AM
Quote from: gordo350a
If you are driving a truck for a living then it's your responsibility to know the weights.  If you are overloaded you  will get the fine. Go to a weigh bridge and find out
AGREE! Even the blokes at the weighbridge can tell you or help you with limits.

Also up to you to know your heights... When I worked at Chemtrans, the boss used to scream that I was stalling in the yard cause I dug out my tape measure to measure height and length of the unit for that day.
It wasn't so bad once you had 'your own' prime mover, but when you were chopping and changing it was always different. Specially when doing hazmat.
Then it was straight to the weighbridge at the front gate for all weights.

Then I was happy to leave the yard - total time "stalling" 20 minutes.
Title: Re: Transport compliance - Inskip Pint
Post by: Johnnos3003 on December 05, 2017, 09:49:14 AM
I guess these will start to become a essential accessory ..

http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html (http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html)


they are cheap, lot cheaper than I would have thought
Title: Re: Transport compliance - Inskip Pint
Post by: Fizzie on December 05, 2017, 09:55:34 AM
I guess these will start to become a essential accessory ..

http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html (http://intertradeholdings.com.au/towsafe-caravan-and-vehicle-weight-control-platform-scales.html)


But wouldn't you need 2 of them (or = the number of tyres) at once?
Title: Re: Transport compliance - Inskip Pint
Post by: r0bl on December 05, 2017, 10:04:19 AM

But wouldn't you need 2 of them (or = the number of tyres) at once?

You just do each wheel then add it up.  For vans/trailers each wheel and towball weight, usually via jockey wheel.  And I noticed you can get a "REICH Caravan Weight Control" scale for around $300.. but it does have mixed reviews on Amazon..

- Rob
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 05, 2017, 10:36:38 AM
Quote from: Johnnos3003
they are cheap, lot cheaper than I would have thought

still 470 for something you'll use once and chuck in cobweb corner in the shed is a waste of cabbage.
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 05, 2017, 07:57:14 PM
If you are driving a truck for a living then it's your responsibility to know the weights.  If you are overloaded you  will get the fine. Go to a weigh bridge and find out

In my case, I cart around small loads......biggest load would be approx 1 ton.
Title: Re: Transport compliance - Inskip Pint
Post by: Brij on December 09, 2017, 08:48:00 PM
You're right, BUT, if a truck has a plate with 4.4T GVM, ( just like the truck I drive ) how do you know it's under 4.4T when fully loaded ? Without knowing the tare, how do you keep under the GVM ?

Same way you keep your 200 and camper under their respective mass limits. :angel:
Title: Re: Transport compliance - Inskip Pint
Post by: Cruiser 105Tvan on December 09, 2017, 10:25:30 PM
Now we don't have rego stickers in Vic. and NO-one puts the tare weight on the outside anymore.
You have 'buckleys of knowing what the Tare is unless your holding the Rego papers.
Unless you have it sitting on a weighbridge empty.
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 10, 2017, 08:14:48 AM
Same way you keep your 200 and camper under their respective mass limits. :angel:
Keeping a 200 and camper under. What do you mean?
Is there a way of doing this

Title: Re: Transport compliance - Inskip Pint
Post by: MadMarv on December 10, 2017, 06:28:49 PM
Ha, might be a bit suss asking the boss for a look at the rego papers !!

Small trucks under 4.5T GVM  don't need a weigh bridge ticket for rego.

Rego papers arnt always right ..... vic roads says for a heavy ridgid truck max weight for a leaf spring suspension is 22.5 ton but on the rego sticker it states max vehicle weight 28 ton .... truck is a i guess a 15 year old scania heavy ridged .... you have to actually know what your state says is legal

Its easy to get weights checked ..... look up public weighbridges .... also Tips weigh trucks in so you could also use one off those places too
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 10, 2017, 06:45:36 PM
Same way you keep your 200 and camper under their respective mass limits. :angel:

I don't......care that is !!  ;D  Have a bullbar and winch, carry almost nothing and towball weight is 140kg..

It's something I don't really think about !!  ;D
Title: Re: Transport compliance - Inskip Pint
Post by: GGV8Cruza on December 11, 2017, 08:56:24 AM
Keeping a 200 and camper under. What do you mean?
Is there a way of doing this

Yes there is, clever planning and a GVM upgrade. Although at a guess 95% of owners do not have any idea of the weight of there set up or decide to let it just fade away and not worry

GG
Title: Re: Transport compliance - Inskip Pint
Post by: Charlie Brown on December 11, 2017, 11:08:20 AM
Been several recent accidents involving caravan rollovers north of Brisbane.  Most, maybe all, have been 200 series LCs.  Maybe overloaded tugs are to blame?
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 11, 2017, 11:24:40 AM
Yes there is, clever planning and a GVM upgrade. Although at a guess 95% of owners do not have any idea of the weight of there set up or decide to let it just fade away and not worry

GG
What is this GVM upgrade you speak about?
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 11, 2017, 11:36:31 AM
What is this GVM upgrade you speak about?
Have a look through his, or swannies or most 200 series build threads
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 11, 2017, 11:49:34 AM
Have a look through his, or swannies or most 200 series build threads
It’s ok I have polyairs in the back of the cruiser so I can carry as much weight as I want.
Title: Re: Transport compliance - Inskip Pint
Post by: GGV8Cruza on December 11, 2017, 01:21:23 PM
What is this GVM upgrade you speak about?

https://www.lovellsauto.com.au/product12d.php (https://www.lovellsauto.com.au/product12d.php)

I have this upgrade, if you are towing anything of significant weight and also have a bullbar and winch fitted you need to get your car up to the 3800kg class.

GG
Title: Re: Transport compliance - Inskip Pint
Post by: gronk on December 11, 2017, 04:23:10 PM
https://www.lovellsauto.com.au/product12d.php (https://www.lovellsauto.com.au/product12d.php)

I have this upgrade, if you are towing anything of significant weight and also have a bullbar and winch fitted you need to get your car up to the 3800kg class.

GG

And while the GVM upgrade is a good thing, especially if you want to stay legal, putting in X branded springs and shocks doesn't really make the 4wd any safer in regards to towing, unless of course the heavier springs help with a heavy van.
You can put on identical suspension and NOT have it engineered, and it will perform exactly the same.....but of course not be legal if you're over the GVM.
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 11, 2017, 05:25:38 PM
I’ve also turned my tow hitch upside down to reduce the tow all weight so I should be legal.
Title: Re: Transport compliance - Inskip Pint
Post by: rags on December 11, 2017, 06:48:44 PM
Been several recent accidents involving caravan rollovers north of Brisbane.  Most, maybe all, have been 200 series LCs.  Maybe overloaded tugs are to blame?

Broad sweeping statement, not sure if statistics back up this.
Clayton's towing post on Facebook the van accidents they attend to, the last couple of posts i have seen have been 100 series.
https://www.facebook.com/pg/Claytonstowing/posts/?ref=page_internal (https://www.facebook.com/pg/Claytonstowing/posts/?ref=page_internal)
Title: Re: Transport compliance - Inskip Pint
Post by: Cruiser 105Tvan on December 11, 2017, 07:00:32 PM
I’ve also turned my tow hitch upside down to reduce the tow all weight so I should be legal.

How does that work Pls.?
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 11, 2017, 07:21:23 PM
It’s easy you take the tow ball off then pull the pin that holds the hitch in then pull the hitch out and turn it upside down. Then put the pin in and put the tow ball back on. My son and I did it all in one afternoon.
Title: Re: Transport compliance - Inskip Pint
Post by: macca on December 11, 2017, 07:34:20 PM
Something smells of dot paintings here

Sent from my SM-G930F using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 11, 2017, 07:42:56 PM
I’ve also painted my to recovery points red as well so now they are rated. The bloke at ARB didn’t agree with me but I still think he is wrong.
Title: Re: Transport compliance - Inskip Pint
Post by: Black Diamond on December 11, 2017, 08:05:28 PM
Something smells of dot paintings here

Sent from my SM-G930F using Tapatalk
Lmao  :cup:
Title: Re: Transport compliance - Inskip Pint
Post by: Cruiser 105Tvan on December 11, 2017, 08:26:44 PM
I think BD & Macca covered it quite nicely.
Title: Re: Transport compliance - Inskip Pint
Post by: 03GV on December 11, 2017, 09:57:29 PM
Newby troll is an old troll!
Title: Re: Transport compliance - Inskip Pint
Post by: gordo350 on December 12, 2017, 07:26:07 AM
Why do trolls pretend to be dumbarses
Title: Re: Transport compliance - Inskip Pint
Post by: DrewXT on December 12, 2017, 07:49:02 AM
🤣🤣

Sent from my Nexus 6P using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: macca on December 12, 2017, 09:04:53 AM
Why do trolls pretend to be dumbarses
You have to ask that question?

Sent from my SM-G930F using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: Charlie Brown on December 12, 2017, 10:02:12 AM
I’ve also turned my tow hitch upside down to reduce the tow all weight so I should be legal.

I’ve also painted my to recovery points red as well so now they are rated. The bloke at ARB didn’t agree with me but I still think he is wrong.

There seem to be a few Sheldons on here  ;D ;D ;D

Don’t worry, some of us are both nice AND understand sarcasm  :cheers:
Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 12, 2017, 10:07:03 AM
Quote from: gordo350
Why do trolls pretend to be dumbarses
pretend?

Runny picked it days ago LMAO

funniest part is he keeps throwing the line out to the fish in the barrel and hasn't had a bite yet LMAO
(http://vignette3.wikia.nocookie.net/filmationghostbusters/images/4/48/Skeleton_Fisherman.jpg)
Title: Re: Transport compliance - Inskip Pint
Post by: BBull on December 12, 2017, 11:22:04 AM
What’s a troll?
Title: Re: Transport compliance - Inskip Pint
Post by: macca on December 12, 2017, 11:45:27 AM
There seem to be a few Sheldons on here  ;D ;D ;D

Don’t worry, some of us are both nice AND understand sarcasm  :cheers:
... and some of us have been around awhile and know how its gunna end

Sheldon

Sent from my SM-G930F using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: Bird on December 12, 2017, 12:25:55 PM
... and some of us have been around awhile and know how its gunna end

Sheldon
:cup: :cup: :cup: :cup: :cup: :cup: :cup:
Title: Re: Transport compliance - Inskip Pint
Post by: macca on December 12, 2017, 01:32:59 PM
What’s a troll?
A 4wd made by Nissan

Sent from my SM-G930F using Tapatalk

Title: Re: Transport compliance - Inskip Pint
Post by: briann532 on December 12, 2017, 06:08:54 PM
:cup: :cup: :cup: :cup: :cup: :cup: :cup:


Yep...........................

But it's till funny to watch.  ;D