Author Topic: 12 Volt Compressors (Read 24595 times)

whitey · « **Reply #50 on:** August 29, 2011, 09:49:59 PM »

Looks the same as the one i got , must admit i did change one of the clamps after about the 6mth mark as one was a tad sus after awhile.

Hairs · « **Reply #51 on:** August 29, 2011, 10:00:19 PM »

Quote from: rotare on August 15, 2011, 08:33:16 PM

When you say castings,

Every part of it, you measure the outside bits, the filter covers, anywhere you can see that it was in a mold, even the blown plastic box has the same join marks, they are Bloody identical to the dearer ones being sold in 'Name Brand' shops.
Before I purchase mine, I looked, watched and went to the stores and looked again.
For 90 odd bucks it could poop it's self tomorrow, but I've had a good run.

Mav · « **Reply #52 on:** August 29, 2011, 10:12:10 PM »

Damn, I jinxed myself. I got flagged down by a guy who had had a flat tyre about 25 kms north of Glendambo in S.A. and when he put his spare on he discovered that it only had about 5 psi in it. I grabed my Typhoon and as I connected up to his battery there was a large spark and that was the end of the Typhoon. It basically shorted out in the motor and the 50A fuse melted so badly that the whole fuse holder assy melted.

So now I own an ARB compressor, I was looking at their new double pumper that has the air tank. It is meant to be installed into the car but at $790.00 it was too dear for me atm.

Boesman · « **Reply #53 on:** August 30, 2011, 09:51:25 PM »

Quote from: Mav on August 29, 2011, 10:12:10 PM

I grabed my Tphoon and as I connected up to his battery there was a large spark and that was the end of the Typhoon. It basically shorted out in the motor and the 50A fuse melted so badly that the whole fuse holder assy melted.

I would put money on it that the 10Amp switch melted and the + wire touched the casing inside thereby melting the fuse.

whitey · « **Reply #54 on:** August 31, 2011, 12:07:31 PM »

that sounds like a good mod with changing the switch Boesman what did u use, think i might do the same even if it still works, that jinx the cat creeps around a bit

rotare · « **Reply #55 on:** August 31, 2011, 04:57:02 PM »

Quote

they are Bloody identical to the dearer ones being sold in 'Name Brand' shops.

Hey mate, you're preaching to the converted! I agree they are all the same and did the same research as you before I brought my ebay "copy"!

Quote

So I changed the switch for a heavy duty one and re-soldered the wires onto the terminals again.

I've already removed the alligator clips and fitted an anderson plug, fitted a decent fuse holder, as well as removing the cheap pressure gauge and fitting a decent one I already had. Sounds like I should upgrade the switch, what one did you fit to yours?

Boesman · « **Reply #56 on:** August 31, 2011, 08:59:30 PM »

I had a switch from an old electric scooter. The one the kids use.

It had a switch to disconnects the battery from the control unit. But any heavy duty one will do. You might have to make the hole bigger in order to fit the bigger switch though.

Hairs · « **Reply #57 on:** August 31, 2011, 09:23:51 PM »

Quote from: rotare on August 31, 2011, 04:57:02 PM

Hey mate, you're preaching to the converted!brought my ebay "copy"!

Even on eBay, there are big price differences for the same unit.
It does pay to research, hey.

baldheadedgit · « **Reply #58 on:** August 31, 2011, 09:54:33 PM »

Been looking at these on EBay... http://www.ebay.com.au/itm/260827255568?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Quoting 100% duty cycle,,, price is good too,,,

Opinion's...

??

BHG

theflyingbadger · « **Reply #59 on:** August 31, 2011, 10:56:57 PM »

Quote from: baldheadedgit on August 31, 2011, 09:54:33 PM

Been looking at these on EBay... http://www.ebay.com.au/itm/260827255568?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Quoting 100% duty cycle,,, price is good too,,,

Opinion's...??

BHG

1.7 cfm is only 48l/min. so will be a bit (lot) slow.

sa_on_patrol · « **Reply #60 on:** August 31, 2011, 11:01:13 PM »

Has anyone tried these?

http://www.bbta.com.au/gold-series-compressor-p-72.html

Sent from my iPhone using Tapatalk

jwb · « **Reply #61 on:** September 01, 2011, 12:11:47 AM »

I have a Repco unit that is similar but is coloured
Differently. It works ok.
Cheers

Hatchetman · « **Reply #62 on:** September 01, 2011, 01:23:49 AM »

I bought a bbta 12volt compressor i tried it once worked great for the wheel barrow cost me $65 from ebay from a dealer within melbourne the sellers name was biggerboyztoyzaustralia i have a picture of mine i hope it lasts me a while seems to inflate a wheel barrel tyre in under 15 seconds, anyone i hope this helps someone cos for the price i got it it seemed like a bargain and the seller had more than ten so maybe someone else can snatch a bargain for themselves take care hatchetman

Bill · « **Reply #63 on:** September 01, 2011, 08:26:55 AM »

Quote from: Hatchetman on September 01, 2011, 01:23:49 AM

I bought a bbta 12volt compressor i tried it once worked great for the wheel barrow cost me $65 from ebay from a dealer within melbourne the sellers name was biggerboyztoyzaustralia i have a picture of mine i hope it lasts me a while seems to inflate a wheel barrel tyre in under 15 seconds, anyone i hope this helps someone cos for the price i got it it seemed like a bargain and the seller had more than ten so maybe someone else can snatch a bargain for themselves take care hatchetman

I have a few things that I purchased from BBT and nothing has let me down yet.
This is my latest purchase from them it works great.
http://www.ebay.com.au/itm/BBT-Inverter-Generator-Camping-Caravan-Outdoors-4-4Kva-/250746285956?pt=AU_Generators_Pumps&hash=item3a61a4af84
Bill

theflyingbadger · « **Reply #64 on:** September 01, 2011, 10:33:51 AM »

I just bought this one...

http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=110737739428&ssPageName=ADME:X:AAQ:AU:1123#ht_760wt_1140

bargain-tastic!

OffRoadDave · « **Reply #65 on:** September 01, 2011, 10:55:02 AM »

Was just down at Aldi checking out their compressor (on sale as of today), if you have the latest 4wd action mag (issue 169) I can tell you it looks identical to the Tigerz11 Thumper ($229) and Terrain Tamer TTAC3 ($495) for $99 which is an absolute bargain, and at that price I grabbed one, can't tell you if it's any good yet as I won't get a chance to play with it till later, but on a $/kg rating it craps on my Projecta Typhoon which is not as quick as it used to be which is why I took a punt on this.

rotare · « **Reply #66 on:** September 01, 2011, 01:28:15 PM »

Quote

I can tell you it looks identical to the Tigerz11 Thumper ($229) and Terrain Tamer TTAC3 ($495) for $99 which is an absolute bargain,

Apparently there must be a difference internally between the the $495 pump and the $99 pump.... maybe gold plated pistons? I mean, no retailer would be so rude to milk a brand name.... would they

OffRoadDave · « **Reply #67 on:** September 01, 2011, 06:30:46 PM »

Hehe surely not, just had a play with the new compressor and she sure goes like an expensive one, if anyone is in the market for a cheap compressor that goes like the clappers, at $99 it's awesome!

Snow · « **Reply #68 on:** September 01, 2011, 11:09:27 PM »

I grabbed an Aldi one as well and it is a ripper. Well put together and is a Heavy fester.

baldheadedgit · « **Reply #69 on:** September 04, 2011, 07:33:02 PM »

Yep. grabed the Aldi one myself today,,,, works realy well, droped the tyre down to 5psi, took about 45 seconds to bring it back to 35psi...

BHG

Bird · « **Reply #70 on:** April 17, 2012, 02:28:20 PM »

We havent had a compressor thread for a while.

So, those with Blue Tongue Compressors, are you still happy with em? Im in the market for a compressor at moment, and these have been round for ever, hoping they are still quality

Bird · « **Reply #71 on:** April 17, 2012, 03:52:31 PM »

Quote from: Lost on April 17, 2012, 02:28:20 PM

We havent had a compressor thread for a while.

So, those with Blue Tongue Compressors, are you still happy with em? Im in the market for a compressor at moment, and these have been round for ever, hoping they are still quality

Edit: anyone got the boss air compressor PX-07?? Looks like a bit of an industrial gigger...
Cant believe the price on the big CKMTP12 ARB unit
http://www.ebay.com.au/itm/130599273935 $875 us$! (probably double this price in AU)

Robert Alley · « **Reply #72 on:** April 17, 2012, 06:01:25 PM »

I have a boss px-07 have had for years it was used 5 days a week for 2 years pumping up airbags in my trailer. Since then over the last 4 years it has still been pumping up airbags and tires just not as regular.
I have just put another piston in it and it made no difference to the performance.
This is what I will buy next
[urlhttp://probag.com.au/shop/index.php?act=viewProd&productId=42][/url]
Rob

RainmanWA · « **Reply #73 on:** April 18, 2012, 08:40:18 AM »

Quote from: Lost on April 17, 2012, 02:28:20 PM

So, those with Blue Tongue Compressors, are you still happy with em? Im in the market for a compressor at moment, and these have been round for ever, hoping they are still quality

I've got a Bluetongue. I upgraded the original hose to 6mm along with Nitto style fittings so I could reach the camper trailer tyres and this resulted in a significant improvement in its performance. With the original hose it took around 4 minutes to pump up a 265/75 from 18 to 30psi, with the new hose it takes 2.5 minutes to go from 16 to 32psi.

If I was in the market for a new compressor I think I'd probably be looking at the newer ARB compressor though.

Bird · « **Reply #74 on:** April 18, 2012, 12:40:13 PM »

Quote from: RainmanWA on April 18, 2012, 08:40:18 AM

I've got a Bluetongue. I upgraded the original hose to 6mm along with Nitto style fittings so I could reach the camper trailer tyres and this resulted in a significant improvement in its performance. With the original hose it took around 4 minutes to pump up a 265/75 from 18 to 30psi, with the new hose it takes 2.5 minutes to go from 16 to 32psi.

If I was in the market for a new compressor I think I'd probably be looking at the newer ARB compressor though.

The new "maxi" ARB one comes in at round $900... Im not in that much rush... would be cheaper to be in NRMA, and call them out each time you go wheeling to pump up your tyres!

Just a few ideas.
http://www.ebay.com.au/itm/130599273935 US $875.50
http://www.ebay.com.au/itm/251039966926 AU $345.00
http://www.ebay.com.au/itm/290698027630 AU $399.00
Blue Tongue - ~$280 from shop up road from werk.
http://www.ebay.com.au/itm/260946979800 $44 LOL!

News:

Author Topic: 12 Volt Compressors (Read 24595 times)