MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: mr_hilux10 on December 23, 2014, 02:35:14 PM
-
Being the anal person i am i have noticed that the towbar tongue in the lc has no anti rattle screw and there is a bit of movement when it is in the hitch with pin as well
Am i missing something or do i learn to live with it
-
http://www.myswag.org/index.php?topic=32354.msg522621#msg522621 (http://www.myswag.org/index.php?topic=32354.msg522621#msg522621)
-
My 200 series is the same, but it doesn't rattle with a van on !!
Previous 2 4wd's had anti rattle bolts, but both had probs.....one snapped the weld off the nut holding the small bolt and the other started wearing a hole into the tongue, so I didn't use it ..
There is a bit of difference between a 2 inch and a 50mm tongue, so make sure the tongue matches the receiver..
-
There suppling shims with the tow kits now to space up the gap.
-
Shims take most of the play out. I have the offroad hitch and cannot fit my old anti rattle hitch bolt as its a solid piece instead of hollow section.
Between the mus tyres and the new exhaust it is hardly noticeable
GG