MySwag.org The Off-road Camper Trailer Forum

General => General Discussion => Topic started by: paceman on May 13, 2020, 08:33:11 AM

Title: Lockable drawer slides
Post by: paceman on May 13, 2020, 08:33:11 AM
Just looking for opinions on sellers/brands of lockable drawer slides?

I am looking for a 500mm lockable slide. 

Weight rating would be around the 50 to 60kg mark, but that isn’t set in stone...

Looking to attach them to a plywood drawer.

I have been looking at the Dunn and Watson slides, but am wondering if anyone has another brand/seller that they have been happy with...


Sent from my iPhone using Tapatalk
Title: Re: Lockable drawer slides
Post by: paul.o on May 13, 2020, 11:06:07 AM
Lockable as in with a catch??

If so, I bought mine from Ovesco for my fridge slide.

All the best.
Title: Re: Lockable drawer slides
Post by: paceman on May 13, 2020, 11:26:12 AM
Lockable as in with a catch??

If so, I bought mine from Ovesco for my fridge slide.

All the best.

i think...

the lockable latch/lever is at the front of the slide, close to where the font of the draw would be... ?

i'll check out Ovesco, thanks...
Title: Re: Lockable drawer slides
Post by: nab on May 13, 2020, 02:25:52 PM
Or do you mean using a padlock or similar? I think almost all the slides lock in the “in” position and have a small lever to Release.
Title: Re: Lockable drawer slides
Post by: Mitch92 on May 13, 2020, 08:52:14 PM
Ovesco
UES
Dunn & Watson
Title: Re: Lockable drawer slides
Post by: shakey55 on May 14, 2020, 06:57:12 AM
I’ll swear by Dunn & Watson.


Sent from my iPhone using Tapatalk
Title: Re: Lockable drawer slides
Post by: paceman on May 14, 2020, 08:05:20 AM
thanks all for the replies and suggestions...

looks like i am going to stick with the Dunn & Watson...

Title: Re: Lockable drawer slides
Post by: GBC on May 14, 2020, 10:54:14 AM
I just used whitco patio bolts on my ply drawers.
Title: Re: Lockable drawer slides
Post by: paceman on May 14, 2020, 11:40:29 AM
I just used whitco patio bolts on my ply drawers.

i don't really need to actually lock the draw from opening with a key...

i just wanted to get the slides that have the large lever at the front that you have to move to open the draw...
Title: Re: Lockable drawer slides
Post by: GBC on May 14, 2020, 11:47:39 AM
i don't really need to actually lock the draw from opening with a key...

i just wanted to get the slides that have the large lever at the front that you have to move to open the draw...

Roger dodger. My drawers don't have locking slides so the bolt keeps them shut. It has lasted longer than the locking drawer slides I have in the camper, they don't love big weight knocking them around, and the patio bolt keeps all the shock load off the slides.
Title: Re: Lockable drawer slides
Post by: stephenh1235 on May 15, 2020, 09:19:31 AM
Industrial Rubber Supplies for those in Queensland & Western Australia, they also have an excellent selection of hinges,locks & other hardware besides the draw slides.
Title: Re: Lockable drawer slides
Post by: paceman on May 15, 2020, 09:27:07 AM
ended up ordering the following:

https://www.ebay.com.au/itm/500mm-60kg-Locking-Drawer-Slides-Fridge-Runners-Draw-Camper-Trailer-Toolbox/112208097048?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 (https://www.ebay.com.au/itm/500mm-60kg-Locking-Drawer-Slides-Fridge-Runners-Draw-Camper-Trailer-Toolbox/112208097048?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649)

made an offer of $50 and they accepted... :)
Title: Re: Lockable drawer slides
Post by: paceman on May 25, 2020, 05:41:09 PM
OK, so my next issue is now that i have the drawer slides, what screw works best??

i have used some small button head screws that i thought would be perfect, but they don't work...

slide keeps hitting the screw heads...

anyone have any experience with screws suitable with these drawer slides?
Title: Re: Lockable drawer slides
Post by: nab on May 25, 2020, 06:33:09 PM
I think you need countersunk screws. Mine were installed into plywood with wood screws (not but and bolts) and they held up fine. Into metal use nuts and bolts obviously
Title: Lockable drawer slides
Post by: paceman on May 25, 2020, 06:36:56 PM
I think you need countersunk screws. Mine were installed into plywood with wood screws (not but and bolts) and they held up fine. Into metal use nuts and bolts obviously
I’m not sure countersunk will work... I tried one and the head of the screw sits above the hole in the slide... it sticks out more than the button head screw...

Mine are going into plywood as well...

Have you got a pic of your install?


Sent from my iPad using Tapatalk
Title: Re: Lockable drawer slides
Post by: GBC on May 25, 2020, 07:03:48 PM
Little 6g countersunk screws or 8g wafer heads is what I used if I remember correctly.
Title: Re: Lockable drawer slides
Post by: nab on May 25, 2020, 09:45:09 PM
Sorry no close up pics but what GBC says sounds familiar.
Title: Re: Lockable drawer slides
Post by: paceman on May 27, 2020, 03:59:40 PM
Draw is finished and works a treat...

(https://uploads.tapatalk-cdn.com/20200527/6427c1e4716b39912189167f690d3f65.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Lockable drawer slides
Post by: #jonesy on May 29, 2020, 09:16:45 AM
Looks good.
Title: Re: Lockable drawer slides
Post by: GeoffA on May 29, 2020, 11:43:40 AM
Draw is finished and works a treat...

Nice....so what screws did you end up using?

 :cheers:
Title: Re: Lockable drawer slides
Post by: paceman on May 29, 2020, 12:41:58 PM
Nice....so what screws did you end up using?

 :cheers:

long story...

as it turns out, the Dunn & Watson ones i originally got were not great...

so, being a bit pissed off by that, i just went to bunnings and bought some of their non-locking goliath slides and they had screws included.

they were a small countersunk, so probably a 6g, just like was suggested...

really disappointed in the D&W slides, if i'm honest.  when i had a closer look, the tracks that hold the ballbearings down were bent and out of alignment. 

even after trying to fix, they just wouldn't run right.  they also seemed to be warped and just wouldn't run smoothly, no matter what i did.

so, when i got the goliath ones, i was thinking that it was my technique to mount the draw slides was inept (which was entirely possible), but they worked without an issue.

trying to get a refund now through D&W, but they won't have a bar of it.  essentially saying that they don't come out of the factory like that.

i am suspecting i may have got a refurbished model.  they were just wrapped in a bag, with some glad wrap and cardboard pieces at each end.

if anyone is thinking about using the goliath slides from bunnings, they were great for me.  screws included and a lifetime warranty.  also, goliath is a sub of UES international...
Title: Re: Lockable drawer slides
Post by: GBC on May 29, 2020, 03:39:45 PM
Glad you got a result - looks good.
I used goliath slides to make up my Joolca HWS slide in the camper a year back - so far so good.
Title: Re: Lockable drawer slides
Post by: paceman on May 30, 2020, 07:08:49 AM
Just been advised by Dallas Watson (from Dunn & Watson) that I will receive a refund.

A fair outcome and one that will not stop me from buying their products again. 


Sent from my iPhone using Tapatalk