MySwag.org The Off-road Camper Trailer Forum
General => General Discussion => Topic started by: towner87 on August 11, 2017, 07:48:07 AM
-
Can someone please give me the dimensions of the Trojan hand pump? Mainly need the length from mounting flange to end of hose barb underneath.
Just needing to see if it will fit where I want it to. Thanks :cheers:
(http://i.imgur.com/r8kF3L5.png)
-
Specifications:
- Extends 95mm above the bench top
- Spout extends 150mm from the centrel of the pump
- Suits a maximum bench thickness of 30mm
- Distance from the bench top to the bottom of the hose barb is 180mm
-
Specifications:
- Extends 95mm above the bench top
- Spout extends 150mm from the centrel of the pump
- Suits a maximum bench thickness of 30mm
- Distance from the bench top to the bottom of the hose barb is 180mm
THANKS CHAMPION :cup: :cheers:
-
No problems , that is what is great about this forum . :D
-
Don't purchase the Trojan alloy body hand pump if you can avoid it, hopefully you have not purchased one yet as they are a pain, and the seal gets stuck after about 4 months -- I went through 3 of them till I purchased the plastic body "Breha" hand pump. The "Breha" hand pump is an Australian made product.. and cost about a bit over $30 -- I purchased mine from BTC in Darwin -- Trojan vs Breha the 2 products just don't compare
Looking online I can see CaravansPlus sells them
https://www.caravansplus.com.au/catalog/product_info.php?products_id=1332 (https://www.caravansplus.com.au/catalog/product_info.php?products_id=1332)
(https://www.caravansplus.com.au/images_tiff/2017/800-06414-al.jpg)
For sizing
(http://gallery.myswag.org/gallery/d/53811-1/Breha_Hand_Pump.jpg)
:cheers: